Wednesday, June 10, 2015

5G Wireless Ecosystem Research and Trial Investments to Reach $5 Billion by 2020

While LTE and LTE-Advanced deployments are still underway, wireless carriers and vendors have already embarked on R&D initiatives to develop so-called “5G” technology, with a vision of commercialization by 2020.


5G is essentially a revolutionary paradigm shift in wireless networking to support the throughput, latency, and scalability requirements of future use cases such as extreme bandwidth augmented reality applications and connectivity management for billions of M2M (Machine to Machine) devices.


Although 5G is yet to be standardized, some of the collectively accepted attributes of the technology include new air interface transmission schemes, new spectrum bands, spectrum aggregation, Massive MIMO, beamforming, D2D (Device to Device) communications and self-backhauling, among others.


Key findings:


  • Driven by regional, national government, wireless carrier and vendor initiatives, we expect 5G Wireless Ecosystem R&D and trial investments will account for nearly $5 Billion by 2020, following a CAGR of nearly 40% over the next 5 years

  • Nearly 70% of these investments will target large scale commercial trial networks in Japan, South Korea and other early pioneering countries

  • Despite a lack of standardization, vendors are aggressively investing in 5G development efforts with a principal focus on new transmission schemes, antenna technologies, and higher frequency bands

  • 5G networks are expected to utilize a variety of spectrum bands, ranging from established cellular bands to millimeter wave frequencies

  • 5G standardization activities are expected to commence between 2015 and 2016

5G Wireless ecosystem research report covers the following topics:


  • 5G requirements, use cases & vertical market applications

  • 5G market drivers and barriers

  • Air interface & antenna technologies: Massive MIMO, waveforms, phased array antennas & beamforming

  • Spectrum technologies: Cognitive radio, spectrum sensing, aggregation & LSA (Licensed Shared Access)

  • D2D communications & self-backhauling networks

  • Complimentary technologies for 5G: NFV (Network Functions Virtualization), SDN (Software Defined Networking), HetNet (Heterogeneous Networking), C-RAN (Cloud RAN), drones & satellites

  • Spectrum options for 5G

  • Standardization & research initiatives

  • Competitive assessment of vendor strategies & commitments to 5G

  • 5G investment and subscription forecasts from 2015 till 2025

The “5G Wireless Ecosystem: 2015 – 2025 – Technologies, Applications, Verticals, Strategies & Forecasts” report presents an in-depth assessment of the emerging 5G ecosystem including key market drivers, challenges, enabling technologies, use cases, vertical market applications, spectrum bands, wireless carrier deployment commitments and vendor strategies. The report also presents forecasts for both 5G investments and subscriptions.


5G Wireless Ecosystem ResearchThe report comes with an associated Excel datasheet suite covering quantitative data from all numeric forecasts presented in the report. Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site.  View the report: “5G Wireless Ecosystem: 2015 – 2025 – Technologies, Applications, Verticals, Strategies & Forecasts”.


 


 



5G Wireless Ecosystem Research and Trial Investments to Reach $5 Billion by 2020

Monday, June 8, 2015

Worldwide ROADM Market Will Grow From $5.4 billion in 2015 to $8.8 Billion in 2020

Network Transmission Market Report and Analysis of Proposed Nokia / Alcatel-Lucent Merger


Nokia has recently announced that it is buying French telecom equipment maker Alcatel-Lucent for $16.6 billion. The merger of Nokia and Alcatel-Lucent will no doubt change the competitive landscape of the optical networking industry. A new report provides a quantitative forecast of a major part of the optical networking market that Nokia is buying into from its proposed purchase of Alcatel-Lucent.


According to a new market report “Network Transmission Market Analysis and Equipment Forecast: ROADMS, DWDM, Routers and Switches and the Impact of Net Neutrality”, the worldwide ROADM market will grow from $5.4 billion in 2015 to $8.8 billion in 2020. In addition to the ROADMs market, the report provides detailed analysis and forecasts for DWDM, Routers, and switches in North America and Worldwide.


This report is focused on forecasting demand for specific types of carrier-class network transmission equipment: ROADMS, DWDM, Routers and Switches.


To make that forecast it will investigate the demand parameters of this situation, which are primarily traffic forecasts. After reviewing the regulatory climate (Net Neutrality), and the market demand, the Report will look at capital expenditure forecasts as a surrogate for Supply. Then it will provide forecasts for various classes (ROADMs, DWDM, Routers and Switches) of optical network equipment in this environment.


Network Transmission Market Analysis Provides:


  • Equipment descriptions and sales forecasts for ROADMS, DWDM, Routers, and Switches through 2020.

  • A discussion of Net Neutrality, the players, the issues, and its impact on equipment sales.

  • Traffic forecasts for the North American Internet through 2020

  • N.A. and World forecasts for Mobile Traffic, Advanced Access Architecture lines(FiOS, U-Verse, Google), High-Speed lines (XDSL and cable modems) and International Traffic (North America only) through 2020.

  • Capital Expenditure forecasts for the major telecom companies through 2020.

  • Listing of Major Vendors in the Transmission Equipment space.

This report covers the very current topic of Network Neutrality, which is much in the headlines as this is being written, and its forecasted impact on network equipment sales.


Network Transmission ReportThe study also examines the network traffic and, through analysis, shows that traffic from four major sources (AAA lines, H-H lines, Mobile lines and International) is responsible for the vast preponderance of traffic and traffic growth. Forecasts are provided (through 2020) for these classes of traffic and for the Internet as a whole. Based on the information from the traffic forecasts, the uncertainty from regulation (Net Neutrality) and the capital investment plans and forecasts, the Report will then provide equipment sales forecasts (units and dollars) for ROADMs, DWDM, Routers, and Switches (all carrier class) through 2020 for North America and for the World. Detailed descriptions of each type of equipment being forecast is also provided.


 


 


 



Worldwide ROADM Market Will Grow From $5.4 billion in 2015 to $8.8 Billion in 2020

Worldwide Market for Thermal Management Products to Reach $15.56 Billion by 2018

ELECTRONICS.CA PUBLICATIONS announces the availability of a new report entitled “Electronic Thermal Management – Technologies, Materials, Devices, New Developments, Industry Structure and Global Markets”. According to this study, the worldwide market for thermal management products is predicted to grow from about $8.8 billion in 2013 to $15.56 billion by 2018, at an average annual growth rate (CAGR) of 12.1%.


“Thermal management” denotes the array of problem-solving design tools and material technologies that systems manufacturers apply to regulate the unwanted heat caused by the normal functioning of an electronic system. Increasing power densities and decreasing transistor dimensions are hallmarks of modern computer chips. Both trends are increasing the thermal management challenge within the chip and surrounding packaging, as well as accelerating research progress on high conductivity materials.


Dramatic changes are underway in the computer, telecommunications and consumer electronics industries. There is a trend toward systems “convergence,” combining computer, telecommunications and consumer system functions all into one system. There is also a trend toward micro-miniaturization and microsystem technologies integrating digital, optical, radio frequency and microelectromechanical systems (MEMS) devices. Microsystem packaging is at the heart of all of these products, since it is this technology that provides the system integration in addition to controlling the size, performance, reliability and cost of the final microsystem.


High-density packaging has been the trend in electronic circuits during the last decade, and that will continue for at least the next five years. In 2013, a typical megaprocessor could pack a staggering 41 million transistors onto a single chip. Running flat out, that chip would dissipate 130 watts of heat – more than a bright household light bulb – from an area the size of a postage stamp.


The trend line of the thermal management industry aligns with the developments of technology in the semiconductor, microprocessor and computer industries. For every advance in performance of these systems, there is a corresponding increase in the operating heat generated by the system. To simply say, however, that demands for thermal management products have increased as the requirements of applications have increased, does not do justice to the unique character of this industry. It is probably more accurate to state that the development of thermal management as an industry is the result of a synergy of solutions constantly engineered to manage excess heat in today’s electronic systems.


electronic thermal management reportDetails of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site. View the report: Electronic Thermal Management – Technologies, Materials, Devices, New Developments, Industry Structure and Global Markets.



Worldwide Market for Thermal Management Products to Reach $15.56 Billion by 2018

S. Korean and Taiwanese Companies Control 56% of Global 300mm Fab Capacity

Vast majority of that wafer capacity is local to those two countries.


Information in this Research Bulletin comes from the Global Wafer Capacity 2015-2019 Report, which was released this month.  The new report provides great detail regarding the current status and forecast of global wafer fab capacity.  More information found at the end of this bulletin.


South Korean and Taiwanese chip companies are well known for manufacturing prowess when it comes to efficiently fabricating huge amounts of IC wafers.  Most of the IC industry’s biggest fab facilities are located in these two countries.  Because of their fab operation and wafer fabricating expertise, IC companies headquartered in South Korea and Taiwan lead the way in capital-intensive segments of the IC industry such as high-unit-volume products like DRAM and flash memory or foundry services making ICs for companies without fabs and a growing number of companies with fabs.


Figure 1 shows that South Korea-based companies Samsung and SK Hynix currently account for 35% of global 300mm wafer capacity.  Samsung alone controls about 24% of all the world’s 300mm capacity.  When looking at 300mm wafer capacity according to fab location instead of headquarters location, 28% of worldwide capacity is in South Korea.  Samsung and SK Hynix both own big 300mm fabs outside of South Korea.  In fact, SK Hynix’s largest fab is in China.  Samsung also has a 300mm fab in China as well as two in the U.S.


Global 300mm Fab Capacity Report


Global 300mm Fab Capacity

Figure 1


Taiwanese companies currently manage 21% of the world’s 300mm capacity, with about 85% of that capacity being committed to foundry services.  The remaining 15% of Taiwan-controlled 300mm capacity is mostly used to produce memory devices.  The vast majority of the 300mm wafer capacity in Taiwan is owned by Taiwanese companies, with the only exception being the 300mm capacity that U.S.-based Micron gets from its Inotera joint-venture with Nanya and its wholly owned fab in Taichung acquired in 2013.  There is only one Taiwanese-controlled 300mm fab located outside of Taiwan and that is UMC’s fab in Singapore.


Figure 1 also shows that even though 15% of the world’s 300mm wafer capacity is located in the North America, 28% of global 300mm capacity is controlled by companies with North American headquarters.  Two other noticeable share differences in the comparison are in China and the ROW region, which in this case is essentially just Singapore and Israel.  The vast majority of 300mm wafer capacity in China and ROW is controlled by foreign companies.


Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site. View the report: Global Wafer Capacity 2015-2019.


 



S. Korean and Taiwanese Companies Control 56% of Global 300mm Fab Capacity

Friday, June 5, 2015

Flexible, Organic and Printed Electronics Market Forecast

New market research report, entitled Printed, Organic & Flexible Electronics: Forecasts, Players & Opportunities, provides the most comprehensive view of the topic, giving detailed ten year forecasts by device type. The market is analyzed by territory, printed vs non printed, rigid vs flexible, inorganic vs organic, cost of materials vs process cost and much more, with over 160 tables and figures. Activities of over 1,000 leading companies are given, as is assessment of the winners and losers to come.


The total market for Flexible, Organic and printed electronics will be worth over $70 billion by 2024. The majority of that is OLEDs (organic but not printed) and conductive ink used for a wide range of applications. On the other hand, stretchable electronics, logic and memory, thin film sensors are much smaller segments but with huge growth potential as they emerge from R&D.


Flexible, organic and printed electronics market forecast by component type in US$ billions*



Source: IDTechEx * For the full forecast data please purchase this report


The following components are assessed, and for each one ten year forecasts are given, along with companies and their activities, case studies, impediments to commercialization and timescales:


  • Logic and memory

  • OLED displays

  • OLED lighting

  • Electrophoretic and other bistable displays

  • Electrochromic displays

  • Electroluminescent displays

  • Other displays

  • Thin film batteries

  • Photovoltaics

  • Sensors

  • Conductors

  • Other



If you are looking to understand the big picture, the opportunity, the problems you can address, or how you can start to use these technologies and the implications involved, this report is a must.  Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site: Printed, Organic & Flexible Electronics: Forecasts, Players & Opportunities





Partial list of tables:


 1. Description and analysis of the main technology components of printed and potentially printed electronics

1.2. Current opportunity, market size and profitability

1.3. Market forecast by component type for 2015-2025 in US $ billions, for printed and potentially printed electronics including organic, inorganic and composites

1.4. The different states of readiness of organic and inorganic electronic technologies (semiconductors and conductors)

1.5. Spend on organic versus inorganic materials 2015-2025 US$ billion

1.6. Split of material types by component

1.7. Market value $ billions of only printed electronics 2015-2025

1.8. Total market value of printed versus non-printed electronics 2015-2025 US$ billion

1.9. Market value $ billions of only flexible/conformal electronics 2015-2025

1.10. Total market value of flexible/conformal versus rigid electronics 2015-2025 in US$ billion

1.11. The market for printed and potentially printed electronics by territory in $ billion 2015-2025

1.12. Possible breakdown of the market for printed and potentially printed electronics in 2035 by numbers and value

1.13. Success and failures

2.1. Market forecasts for 2035 in US$ billion

2.2. End user markets relevant to printed electronics

2.3. Leading market drivers 2025

2.4. Some potential benefits of printed and partly printed organic and inorganic electronics and electrics over conventional devices and non-electronic printing in various applications

2.5. Types of printed/thin film photovoltaics beyond silicon compared, with examples of suppliers

2.6. Primary assumptions of organic electronics in full production 2013-2035

3.1. Global market for printed electronics logic and memory 2015-2025 in billions of dollars, with % printed and % flexible



Flexible, Organic and Printed Electronics Market Forecast

Distributed Fiber Optic Sensor Market

The distributed fiber optic sensor market stood at $585 million in 2013. The market is projected to be $1.458 billion in 2018 with 70% associated with the oil and gas segments, according to a recent market survey report conducted by the Photonic Sensor Consortium.


The Photonics Sensor Consortium in conjunction with Light Wave Venture was started in 2003 as an independent organization to assist in the market development and commercialization of photonic sensor technology. The primary focus has been on distributed fiber optic sensors. Over the last 11years, the Consortium has tracked the market and provided overall projections and market analysis for active participants. This report is the first to be available to the general photonics industry.


Photonic Sensor Consortium Market Report


Why is there such a strong interest in this technology? Fiber optic sensors represent a technology base that can be applied to a multitude of sensing applications. There are several characteristic advantages of fiber optics that make their use especially attractive for sensors:


  • Nonelectrical

  • Explosion-proof

  • Small size and weight

  • Allow access into normally inaccessible areas and harsh environments

  • Immune to radio frequency interference (RFI) and electro-magnetic interference (EMI)

  • Solid-state reliability

  • High accuracy

  • Can facilitate distributed sensing

Most physical properties can be sensed optically with fibers. Light intensity, displacement (position), temperature, pressure, rotation, sound, strain, magnetic field, electric field, radiation, flow, liquid level, chemical analysis, and vibration are just some of the phenomena that can be sensed.


Fiber optic sensors have been used successfully for many years in military gyroscopes and hydrophones. However, their use in smart oil wells has been the key to enabling North America to be on a path to energy independence.


Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site.  View the report: 2014 Photonic Sensor Consortium Market Survey Report.


 



Distributed Fiber Optic Sensor Market

Wednesday, June 3, 2015

Wireless M2M & IoT Market Opportunities Report

Global spending on wireless M2M technology is expected to reach nearly $200 Billion by the end of 2014. Despite its low ARPU, the wireless M2M market has become a key focus of many mobile network operators as their traditional voice and data markets become saturated. Likewise, government and regulatory initiatives such as the EU initiatives to have a smart meter penetration level of 80% by 2020 and the mandatory inclusion of automotive safety systems such as eCall in all new car models, have also helped to drive overall wireless M2M connections and revenue.


By enabling network connectivity among physical objects, M2M has initiated the vision of the Internet of Things (IoT) – a global network of sensors, equipment, appliances, computing devices, and other objects that can communicate in real time. This gives rise of a multitude of application possibilities including but not limited to location tracking, diagnostics, process automation, remote monitoring/control and even entertainment. Given the vast array of M2M and IoT applications, the industry has attracted attention from a multitude of vertical market segments.


Consequently we expect the wireless M2M market to account for $196 Billion in revenue by the end of 2020, following a CAGR of 21% during the six year period between 2014 and 2020. Eyeing this lucrative opportunity, vendors and service providers across the highly fragmented M2M value chain have become increasing innovative in their strategies and technology offerings which have given rise to a number of submarkets such as M2M network security, Connected Device Platforms (CDP) and M2M application platforms.


The “The Wireless M2M & IoT Bible: 2014 – 2020″ report presents an in-depth assessment of the global wireless M2M market.  In addition to covering the business case, the challenges, the industry’€™s roadmap, value chain analysis, deployment case studies, and the vertical market ecosystem, vendor service/product strategies and strategic recommendations, the report also presents comprehensive forecasts for the wireless M2M market from 2014 till 2020, including an individual assessment of the following submarkets: Network Connectivity, Application Services, Embedded Cellular M2M Modules, Network Security, Connected Device Platforms (CDP), Application Platforms (Application Enablement Platforms, AEP and Application Development Platforms, ADP), Integration Services and Enabling Technologies. The forecasts and historical revenue figures are individually segmented for eight vertical markets, Eight air interface technologies, six geographical regions and 53 countries.


Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site. View the report: The Wireless M2M & IoT Bible: 2014-2020 – Opportunities, Challenges, Strategies, Industry Verticals and Forecasts.


 



Wireless M2M & IoT Market Opportunities Report