PCB Industry Results for September 2015

North American PCB Sales Growth Continues

IPC — Association Connecting Electronics Industries® announced today the September findings from its monthly North American Printed Circuit Board (PCB) Statistical Program. Sales growth continued in September and the book-to-bill ratio fell back to a more normal but still positive 1.05.

Total North American PCB shipments increased 3.3 percent in September 2015 compared to September 2014. Year-to-date shipment growth finally reached positive territory at 0.3 percent, after struggling to overcome negative sales growth rates seen earlier this year. Compared to the previous month, PCB shipments were up 12.1 percent.

PCB bookings decreased 2.0 percent compared to September 2014, reducing year-to-date order growth to 5.2 percent. Orders were down 7.4 percent in September compared to the previous month.

“The North American PCB industry continues to see modest but positive sales growth, the result of strong order growth in most months of 2015. Orders contracted in September bringing the book-to-bill ratio down from a 5-year high in August to a more moderate level,” said Sharon Starr, IPC’s director of market research. “The book-to-bill ratio remains positive for the 12th consecutive month,” she added, “which is a strong indicator of positive sales growth in the fourth quarter of this year and into next year.”

Detailed Data Available

The next edition of IPC’s North American PCB Market Report, containing detailed September data from IPC’s PCB Statistical Program, will be available within the next week. The monthly report presents detailed findings on rigid PCB and flexible circuit sales and orders, including separate rigid and flex book-to-bill ratios, military and medical market growth, demand for prototypes, and other timely data.

Interpreting the Data

The book-to-bill ratios are calculated by dividing the value of orders booked over the past three months by the value of sales billed during the same period from companies in IPC’s survey sample. A ratio of more than 1.00 suggests that current demand is ahead of supply, which is a positive indicator for sales growth over the next three to six months. A ratio of less than 1.00 indicates the reverse.

Year-on-year and year-to-date growth rates provide the most meaningful view of industry growth. Month-to-month comparisons should be made with caution as they reflect seasonal effects and short-term volatility. Because bookings tend to be more volatile than shipments, changes in the book-to-bill ratios from month to month might not be significant unless a trend of more than three consecutive months is apparent. It is also important to consider changes in both bookings and shipments to understand what is driving changes in the book-to-bill ratio.

IPC’s monthly PCB industry statistics are based on data provided by a representative sample of both rigid PCB and flexible circuit manufacturers selling in the USA and Canada. IPC publishes the PCB book-to-bill ratio at the end of each month. Statistics for the current month are available in the last week of the following month.

Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site.  View Report Contents: IPC’s North American PCB Market Report. Electronics.ca Publications is an IPC member and authorized distributor of IPC industry standards, workforce training products, and market research reports.

 

PCB Industry Results for September 2015

ZigBee Standards Will Be Used in Over 80% of 802.15.4 Chipset Shipments in 2020

ELECTRONICS.CA PUBLICATIONS, the electronics industry market research and knowledge network, announces the availability of a new report entitled “ZigBee Lights Up the Internet of Things: A Market Dynamics Report“.  New research finds that annual shipments of IEEE 802.15.4 chipsets nearly doubled last year and will increase by 550% over the next five years. In 2020, ZigBee standards will be used in 8 out of 10 of the 802.15.4 chipset shipments.

---

“ZigBee has always provided flexibility for developers and now ZigBee is rapidly becoming the consumer technology of choice for emerging smart home products,” says Mareca Hatler, ON World’s research director. “This trend is expected to accelerate as ZigBee 3.0 unifies its application profiles and the Thread Group provides a standards based IP addressable wireless mesh network layer.”

Annual unit shipments for ZigBee/802.15.4 nearly doubled last year and will increase by 550% over the next five years. In addition to ZigBee PRO, the most widely adopted wireless mesh network protocol, the ZigBee Alliance also certifies ZigBee RF4CE devices for simple, ultra-low power remote controls and the ZigBee Alliance is also working on a new specification for outdoor wireless mesh networking using IEEE 802.15.4g and 6LoWPAN.

The Thread specification that is scheduled to be released this July will simplify and streamline the creation of smart home IoT products and services. Through a collaboration with the ZigBee Alliance, the Thread Group benefits from over a decade of development of application profiles and ZigBee 3.0 in particular. ZigBee 3.0 is scheduled to be completed this year and will unify commonly used ZigBee profiles such as ZigBee Light Link, ZigBee Home Automation, ZigBee Health Care and others into a single application profile suite, significantly streamlining product development and interoperability among vendors.

Applications for the IoT continue to expand with a growing number of IoT cloud providers such as Ayla Networks, Arrayent, GreenWave Systems, Helium, Kitu Systems, SmartThings (Samsung) and Wink (Quirky) that have recently raised $500 million in venture or equity investments.

By 2020, this new study projects that over 80% of IEEE 802.15.4 annual shipments will use a ZigBee standard. However, ZigBee is facing intensifying competition from low power variants of WiFi and Bluetooth Smart that are gaining tremendous momentum currently from the mobile, IT and consumer electronics industries. Within the next five years, the study projects that annual wireless sensor network chipset shipments will exceed 2 billion.

This report analyzes the evolving market forces, technology advances and competitive dynamics for 22 unique ZigBee markets and provides 5-year forecasts for 802.15.4/ZigBee and competing alternatives including WiFi, Bluetooth, Z-Wave, EnOcean and others. It also includes key findings from a recently completed survey with 1,000+ consumers and an extensive analysis of hundreds of ZigBee/802.15.4 products and services.

ZigBee Lights Up the Internet of Things

Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site.  View the report: “ZigBee Lights Up the Internet of Things: A Market Dynamics Report“.

 

ZigBee Standards Will Be Used in Over 80% of 802.15.4 Chipset Shipments in 2020

Worldwide ROADM Market Will Grow From $5.4 billion in 2015 to $8.8 Billion in 2020

Network Transmission Market Report and Analysis of Proposed Nokia / Alcatel-Lucent Merger

Nokia has recently announced that it is buying French telecom equipment maker Alcatel-Lucent for $16.6 billion. The merger of Nokia and Alcatel-Lucent will no doubt change the competitive landscape of the optical networking industry. A new report provides a quantitative forecast of a major part of the optical networking market that Nokia is buying into from its proposed purchase of Alcatel-Lucent.

According to a new market report “Network Transmission Market Analysis and Equipment Forecast: ROADMS, DWDM, Routers and Switches and the Impact of Net Neutrality”, the worldwide ROADM market will grow from $5.4 billion in 2015 to $8.8 billion in 2020. In addition to the ROADMs market, the report provides detailed analysis and forecasts for DWDM, Routers, and switches in North America and Worldwide.

This report is focused on forecasting demand for specific types of carrier-class network transmission equipment: ROADMS, DWDM, Routers and Switches.

To make that forecast it will investigate the demand parameters of this situation, which are primarily traffic forecasts. After reviewing the regulatory climate (Net Neutrality), and the market demand, the Report will look at capital expenditure forecasts as a surrogate for Supply. Then it will provide forecasts for various classes (ROADMs, DWDM, Routers and Switches) of optical network equipment in this environment.

Network Transmission Market Analysis Provides:

• Equipment descriptions and sales forecasts for ROADMS, DWDM, Routers, and Switches through 2020.


• A discussion of Net Neutrality, the players, the issues, and its impact on equipment sales.


• Traffic forecasts for the North American Internet through 2020


• N.A. and World forecasts for Mobile Traffic, Advanced Access Architecture lines(FiOS, U-Verse, Google), High-Speed lines (XDSL and cable modems) and International Traffic (North America only) through 2020.


• Capital Expenditure forecasts for the major telecom companies through 2020.


• Listing of Major Vendors in the Transmission Equipment space.

This report covers the very current topic of Network Neutrality, which is much in the headlines as this is being written, and its forecasted impact on network equipment sales.

The study also examines the network traffic and, through analysis, shows that traffic from four major sources (AAA lines, H-H lines, Mobile lines and International) is responsible for the vast preponderance of traffic and traffic growth. Forecasts are provided (through 2020) for these classes of traffic and for the Internet as a whole. Based on the information from the traffic forecasts, the uncertainty from regulation (Net Neutrality) and the capital investment plans and forecasts, the Report will then provide equipment sales forecasts (units and dollars) for ROADMs, DWDM, Routers, and Switches (all carrier class) through 2020 for North America and for the World. Detailed descriptions of each type of equipment being forecast is also provided.

 

 

 

Worldwide ROADM Market Will Grow From $5.4 billion in 2015 to $8.8 Billion in 2020

200 Million Smart Home Safety and Security Devices by 2020

ELECTRONICS.CA PUBLICATIONS announces the availability of a new report entitled “Smart Home Safety & Security – A Market Dynamics Report”.  According to this report, competition is intensifying for smart home service providers. This market research report covers the global IP security/smart home market as well as smart home safety and security products and services in the managed services, retail and professional installer channels. 

“Cloud-based open platforms are disrupting and creating new opportunities for smart home services,” said Mareca Hatler ON World’s research director. “Consumers are demanding greater choices as well as lower costs and smart home service providers are responding through strategic alliances and open source initiatives.”

ON World’s recently completed survey with 1,000 U.S. adults found that 30% are likely to adopt a smart home system within three years. Over half would like to have at least two integrated smart home applications and 60% of these would like three or more integrated applications. For half the respondents, safety and security is the primary reason they would adopt a smart home system.

Consumers are most satisfied with smart garage door openers, motion sensors and door locks, according to ON World’s evaluation of 170 smart home safety and security products with 20,000 product reviews. Some of the fastest growing product segments include video doorbells, smart smoke detectors and multi-purpose motion sensors.

Open source initiatives such as the AllSeen Alliance, OIC and mozaiq operations aim to accelerate smart home IoT product development and ensure interoperability across applications and transport layers. The AllSeen Alliance has grown rapidly over the past two years with over 100 members including smart home software, hardware and platform market leaders and innovators such as AT&T, Cisco, D-Link, Icontrol Networks, Legrand, LG, Honeywell, Iris by Lowe’s, Microsoft, Muzzley and Technicolor.

By 2020, there will be 200 million Internet connected wireless smart home security and safety products installed worldwide. At this time, 53% will be sold through managed services providers down from three quarters this year as sales through the retail/DIY channel will increase faster.

“Smart Home Safety & Security – A Market Dynamics Report” covers the global IP security/smart home market including safety, security, HVAC/energy, lighting controls and others as well as 12 smart home safety and security product segments for the managed services, retail/DIY and professional installer channels. It includes the results from a survey with 1,000 U.S. consumers; an evaluation of 170 products and 20,000 reviews; a competitive analysis; and 6-year global forecasts for installed systems and devices, revenues for equipment, software and services, and annual unit shipments by market, product segment and technology.

Smart Home Safety & Security – A Market Dynamics Report

Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site.  View Report Contents: “Smart Home Safety & Security – A Market Dynamics Report”.

200 Million Smart Home Safety and Security Devices by 2020

U.S.A. Electronic Security Product Demand to Exceed $16 Billion in 2019

Demand for electronic security products in the US is projected to rise 7.0 percent annually through 2019 to $16.2 billion.

Strengthening new construction expenditures following the recession-impacted 2009-14 period will drive gains. A heightened perceived risk of crime due to widespread media coverage will also support gains, even as the actual number of crimes has declined in recent years. Technological advances will promote sales gains in all segments, both by providing a boost to value demand via the incorporation of value-added features and by increasing market penetration.

These and other trends are presented in the new study Electronic Security Products. This study represents a unique combination of the research skills and resources of The Freedonia Group and the security industry insight of the Security Industry Association (SIA) and its members.

Demand for video surveillance products and systems designed for use in security-related settings will advance 8.2 percent annually, the fastest growth of the five primary electronic security product categories. In 2014, there were approximately 35 million total video surveillance security cameras installed and in use in the United States. That number will continue to expand for the foreseeable future as market penetration increases and as locations add more cameras to their existing surveillance systems.

Access control systems will see strong gains as smart card-based systems gain traction over less secure technologies such as proximity and magnetic stripe cards. Access control systems that integrate increasingly advanced layers of credentials, such as mobile phones and biometrics, will support further gains. Rising consumer familiarity with biometric systems, driven by the use of biometric technologies in identification applications, will help promote demand for the small but rapidly growing biometric access control segment. Improvements in reliability and efficiency of biometric devices, coupled with falling prices, will further aid adoption.

Interoperability as well as innovations in mobile monitoring will boost demand for alarms, which accounted for the largest share of sales in 2014. “The increasing array of plug-and-play electronic security devices that are self-monitored will expand the potential market base of consumers willing to purchase supplemental security measures,” notes analyst Katherine Brink. “These smart products are controlled and accessed via mobile devices, aiding security equipment sales as interest in smart home automation systems also rises.” The alarm segment will further benefit from innovations in personal emergency response service (PERS) alarms.

US ELECTRONIC SECURITY PRODUCT DEMAND (million dollars)
% Annual Growth
Item	2009	2014	2019	2009- 2014	2014- 2019
Security Product Demand	9445	11550	16200	4.1	7.0
Alarms	2725	3375	4750	4.4	7.1
Access Controls	2850	3145	4470	2.0	7.3
Video Surveillance	2135	3075	4555	7.6	8.2
Contraband Detection	1140	1355	1675	3.5	4.3
Electronic Article Surveillance	426	400	485	-1.3	3.9
Other	169	200	265	3.4	5.8

Source: Freedonia Electronic Security Products study

(published 11/2015, 424 pages) is available from Electronics.ca Publications.

 

U.S.A. Electronic Security Product Demand to Exceed $16 Billion in 2019

IPC-4101D-WAM1 Brings Significant Changes and Clarifications

If you need the most current specifications for PCB materials used in rigid or multilayered printed boards, then it is time to upgrade to IPC-4101D-WAM1. This newly revised standard brings critical updates to the already valuable IPC-4101D, Specification for Base Materials for Rigid and Multilayer Printed Boards.

Why wait? Upgrade to the IPC-4101D-WAM1 today!

IPC-4101D-WAM1 delivers key updates for board designers, specifiers of board materials, and OEM’s who use and keep boards current with base materials used in PCBs.

This revision:

• covers requirements for laminate or prepreg base materials used primarily for rigid and multilayer printed boards for electrical and electronic circuits


• contains 64 individual, keyword searchable specification sheets, including a brand new sheet that expands offerings for commercially available laminates and prepregs


• clarifies what is stated in the original release of IPC-4101D for the FR-4.0 materials as “None” for inorganic filler content, now states “<5%” is allowed


• adds table 3-10, Permissible Laminate Substitutions for Specification Sheets /21, /24, /26 and /30

IPC4101D-WAM1

This revision brings significant changes and clarifications. Learn more about how these updates can benefit you. Order IPC4101D-WAM1 today!

 

 

IPC-4101D-WAM1 Brings Significant Changes and Clarifications

2016 Vertical Markets for IoT Connector Products

ELECTRONICS.CA PUBLICATIONS announces the availability of a new five chapter, 162 page research report analyzing the impact the Internet of Things (IoT) will have on the connector market. This first volume, which focuses on the consumer, computer and telecom market sectors, provides a look at the applications and connectors used in these applications that will most be influenced by the growth of the IoT.

Some think that the Internet of Things (IoT) term was coined rather recently, but it was used as early as 2009 by Kevin Ashton to describe the new idea of linking RFID in Proctor & Gamble’s supply chain to the Internet. He used it to describe his vision of computers keeping track of and counting everything, as opposed to people feeding this information into computers by typing, pressing a record button, taking a digital picture or scanning a bar code. Ashton’s vision is this: “If we had computers that knew everything there was to know about things—using data they gathered without any help from us—we would be able to track and count everything, and greatly reduce waste, loss and cost. We would know when things needed replacing, repairing or recalling, and whether they were fresh or past their best. We need to empower computers with their own means of gathering information, so they can see, hear and smell the world for themselves, in all its random glory. RFID and sensor technology enable computers to observe, identify and understand the world—without the limitations of human-entered data.”

While the IoT is not quite at the level that Ashton envisioned yet, it is well on its way with a plethora of “things” being tracked. These “things” range from a Fitbit you wear on your wrist to track your health and fitness to tracking farmers’ tractors and everything in between. These “things” are pervasive in our everyday lives now and new ones are being invented at increasing rates.

The goal of this report is to explain the different IoT vertical markets and technologies and to detail the effects these may have on the connector industry. Chapter 2 of the report covers definitions that will be used throughout the report, and Chapter 3 highlights the wireless technologies and trends in the IoT market specific to telecommunications, computer and consumer devices. Detailed in Chapter 4 are IoT devices and applications and the specific connector products that are affected by them. In Chapter 5, five-year forecasts for these connectors segmented by region, market segment and Bishop’s traditional connector categories are provided. In addition, included are forecasts for specific connector product types that are poised for growth due to IoT applications. These include modular jacks used in networking applications; board-mount high-speed I/O; USB; micro-coax for smartphones; FPC/FFC used in portable devices; and HDMI used in HDTVs and displays.

The total market for IoT connector products sold into computer, consumer and telecom applications reached more than $14.5 billion in 2015 and is anticipated to grow significantly by 2020, resulting in substantial increases in a number of key connector products.

Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site. View Report Contents: The Internet of Things Impact on the Connector Industry.

2016 Vertical Markets for IoT Connector Products

Commercially Significant Market for Graphene Products to Develop Between 2015 and 2020

ELECTRONICS.CA PUBLICATIONS, the electronics industry market research and knowledge network, announces the availability of a new report entitled “Graphene: Technologies, Applications and Markets“. Although the nascent commercial market for graphene-based products currently is very small, between 2015 and 2025 the market should achieve unprecedented growth rates through technological advancements. New report reveals that increasing patent activity suggests technology trends are under way, ripening the market for explosive future growth.

---

Graphene is a sheet of carbon atoms bound together with double electron bonds in a thin film only one atom thick. The atoms in graphene are arranged in a honeycomb-style lattice pattern, an arrangement that provides strength, flexibility and electrical conductivity. The basic structural element of several forms of carbon, including graphite, carbon nanotubes and fullerenes, graphene has opened up new horizons for high-energy particle physics research and electronic, optical and energy applications.

Potential electronics applications of graphene include ultra-small transistors, super-dense data storage, touchscreens and wearable electronics. In the energy field, potential applications include ultracapacitors to store and transmit electrical power as well as highly efficient solar cells.

Global Market for Graphene

BCC research group expects a commercially significant market for graphene products to develop between 2015 and 2020, when the market is projected to be worth more than $310.4 million. The graphene market should continue to grow rapidly after 2020, approaching $2 billion by 2025.

Graphene printed electronics currently account for virtually all of the (very small) commercial market for graphene technologies. By 2020, structural materials should lead the market (23.2% market share) followed by displays (16.9% market share), graphene capacitors (16.9% market share) and high-performance computing applications (10.5% market share). Capacitors are projected to account for the largest share (31.6%) of the market for graphene technologies by 2025.

One challenge of chemical vapor deposition (CVD) for the production of graphene is removing the graphene film from the metal substrate without contaminating it or ruining it. Several groups of researchers are working on solutions to this challenge. One of the most promising potential applications foreseen for this technology is the production of transparent electrodes for electronics screens.

In a field where many products and applications are still under development, an analysis of recent patents granted is a useful indicator of technology trends that will affect the graphene market in the mid-to-long term.

The number of U.S.patents granted for graphene-related inventions has been growing over the last 10 years, from four patents in 2005 to 309 in 2014 and 386 in just the first 10 months of 2015. Among the 355 patents issued for graphene applications, structural materials account for the largest number of patents identified. This trend is a clear indication of the growing interest in graphene.

Graphene: Technologies, Applications and Markets examines markets for graphene, with specific coverage of graphene technologies and applications. Analyses of global market drivers and trends, with data from 2014, estimates for 2015, and projections of CAGRs through 2020, and through 2025, are provided.

Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site. View the report: “Graphene: Technologies, Applications and Markets“.

Commercially Significant Market for Graphene Products to Develop Between 2015 and 2020

Surging Demand for CCTV and Video Surveillance Systems Drives the Electronic Security Systems Market

ELECTRONICS.CA PUBLICATIONS announces the availability of new market research studies which cover CCTV and Video Surveillance Systems, and comprehensive analysis of industry segments, trends, growth drivers, market share, size and demand forecasts on the Global Electronic Security Systems (ESS) market. The global market for Electronic Security Systems is projected to exceed US$80 billion by 2020, driven by the surging demand for CCTV and video surveillance systems and the critical need to restrict unauthorized entry and access amid escalating security concerns. 

Electronic Security Systems, CCTV and Video Surveillance Market

Electronic Security represents the use of technology and electronic devices for ensuring safety and security of human life, physical assets, and business operations by tracking and preventing unauthorized access to restricted premises, sensitive data, or high value assets. As key enablers of advanced electronic security, alarms, electronic access controls systems (EACS) and CCTV and Video surveillance systems have been well received by security conscious individuals, commercial establishments, and governments across the world. Rise in terrorist attacks, vandalism, campus violence, and the resulting need for personal safety, and security at public places such as transits, city centers, educational institutions, as well as borders have been driving the ESS market over the years. Other factors benefiting market growth include heightened levels of fear over security among individuals, stringent regulatory mandates, recovering new building constructions, and surging demand for technologically superior yet cost effective products.

Future growth in the market will be driven by societal changes, which will continue to trigger security threats like terrorist attacks, racism, and fascism. Also, the changing nature of crime in the form of online fraud, identity theft, internet related crimes, property theft, and vandalism will throw the spotlight on the need for advanced electronic security solutions such as digital CCTV, IP based video surveillance, remote-monitoring systems, and IP based access control systems. Falling prices; ever expanding product range; favourable legal, social and political perspectives; migration from analog to IP-based video surveillance; surging investments in government security projects; rapid proliferation of HD CCTVs, rising need to restrict unauthorized entry and access; integration of multiple technologies; expanding applications of biometrics EACS; and the power of cloud computing in enabling security software as a service, are also expected to benefit market expansion in a big way in the coming years.

As stated by the new market research report on Electronic Security Systems (ESS), the United States represents the largest market worldwide, followed closely by Europe. Rise in events of security infringement, significant upgrading and integration of highly advanced security systems by commercial and residential buildings, and rising government and enterprise focus on safeguarding human life, physical and digital assets, and infrastructure, represent key growth drivers in developed markets. Asia-Pacific ranks as the fastest growing market with a CAGR of 14% over the analysis period. Growing prominence of Asian countries as a manufacturing hub for electronic security systems, robust construction activity driven by healthy gains in GDP growth, rising disposable incomes of an expanding base of middle class population, and growing number of civil infrastructure projects, among others, represent key growth drivers in the region.

Key players covered in the report include ADT LLC, Allegion plc, ASSA ABLOY AB, Axis Communications AB, Bosch Security Systems, Changzhou Minking Electronics Co., Ltd., Fermax Electronica S.A.U., Global Security Solutions, Gunnebo AB, Hanwha Techwin, Hikvision Digital Technology Co., Ltd., Honeywell International Inc., Huviron Co., Ltd., Identive Group, Inc., Johnson Controls, Inc., Kaba Group, Mobotix AG, Panasonic Corporation, Schneider Electric, SAFRAN Group, Sony Electronics, Inc., Swann Communications Pty. Ltd., Toshiba America, Inc., Tyco International Ltd., UTC Building and Industrial Systems, Yoko Technology Corp., and Zhejiang Dahua Technology Co., Ltd., among others.

The research report provides a comprehensive review of market trends, issues, drivers, mergers, acquisitions and other strategic industry activities of global companies. The report provides market estimates and projections in value for the US, Canada, Japan, Europe (France, Germany, Italy, UK, Spain, Russia, and Rest of Europe), Asia-Pacific (China, India, and Rest of Asia-Pacific), Latin America (Brazil, and Rest of Latin America), and Rest of World. Product segments analyzed in the report include Alarms, Electronic Access Control Systems (EACS), CCTV and Video Surveillance Systems, and Others.

Details of  2 new reports, table of contents and ordering information can be found on Electronics.ca Publications’ web site.

View Report Contents for:

• CCTV and Video Surveillance Systems – Global Strategic Business Report
  and


• Electronic Security Systems – Global Strategic Business Report

 

Surging Demand for CCTV and Video Surveillance Systems Drives the Electronic Security Systems Market

Industrial Robots: -- Markets Reach $48.9 Billion By 2021

ELECTRONICS.CA PUBLICATIONS announces the availability of a new study “Industrial Robots: Market Shares, Strategies, and Forecasts, Worldwide, 2015 to 2021”. Robots in general are poised to change every aspect of modern life. Robots are poised to change everything, what we eat, how we eat it, what we drive, how we drive it, what we manufacture, how we manufacture it, and the military, how we defend ourselves.

Robot technology is based on platforms that leverage sensors, controllers, software modules, cameras, visualization, and locomotors deploying machines for control of all repeatable process. Industrialization is after all the repetition of some task to create process. Robots take this a step further to create automation of process with the ability to move the units.

Robots are promising to improve yields in every industry. Robots make crops safer by eliminating or virtually eliminating herbicides. Downstream processing system solutions and robots achieve automation of process. Robots meet stringent hygiene and safety regulations, work tirelessly 24 hours a day, and relieve human workers of physically arduous tasks. Robots contribute to the freshness, variety and quality of food. Projects are ongoing. Projects are ongoing.

What could be tastier than a fresh picked strawberry, fully ripe, full of juicy appetence, exquisite in every way? Plant factories, grow lights, vertical farming appliances, and robots that make them possible are poised to change the economics of food growing. Robots in general are poised to change every aspect of modern life. Robots are poised to change everything, what we eat, how we eat it, what we drive, how we drive it, what we manufacture, how we manufacture it, and the military, how we defend ourselves.

Robots are set to bring a new industrial revolution more important than anything seen before. Industrial robots perform repetitive tasks efficiently, they do not eat, they do not make mistakes, they do not get tired, they do what they are told, they work 24 hours per day 7 days a week. Manufacturing plants are frequently long aisles of nothing but robots, no human in sight.

Beyond industrial robots that repeat actions, more intelligent robots loaded with sensors are able to automate process using processors and cameras to control action. Use of microprocessors provides a measure of intelligent control over the activity of the robot based on input from the sensors and the cameras.

Tablet apps are congruent technology for all robots, adding platform functionality and providing basic platform controls. There is the potential for standardization so the robotic platforms are congruent, but that has not happened yet. Companies with a presence in tablet markets are poised to benefit enormously from the growth of robot markets. The app software provides a universal mechanism that will permit flexible response to changing market conditions.

According to Susan Eustis, lead author of the the study, “The opportunity to participate in robotic markets is compelling. This new market is evolving as new automated process based on breakthroughs and innovation in technology is expressed in robotic platforms. Microprocessor technology, optics, cameras, nanotechnology, new materials, thin film batteries, and sensors are among the technologies being put to use in innovative ways in robots. The ability to apply any technology from any company is phenomenal.”

Consideration of Robot Market Forecasts indicates that markets at $53 billion will reach $171.7 billion by 2020. Growth comes as every industry achieves efficiency by automating process robotically. Robots are unique because they can perform multiple steps without human intervention and they can adapt to different conditions and different types of devices to be manipulated. The sensors and the cameras in the robots make them flexible.

Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site. View the report:  “Industrial Robots: Market Shares, Strategies, and Forecasts, Worldwide, 2015 to 2021“.

 

 

Industrial Robots: -- Markets Reach $48.9 Billion By 2021

European EMS Market Analysis

2014 was a tough year for most EMS companies with revenues in Western Europe  declining by 3% while an increase of 3.4% in Central and Eastern Europe (CEE) and  Middle East/North Africa (MENA) helped the overall European market post growth of 0.5%. Although the market is expected to recover, growth is forecast to remain flat in 2015/2016 before gaining some traction in the later part of the forecast period.

---

EMS revenues in Western Europe are forecast to reach Euro 11.16 billion in 2019, up from Euro 10.37 million in 2014, with the market increasingly focused on the Aerospace, Defence, Automotive, Medical, Control & Instrumentation, Industrial and Telecom  (ADAMCIT) segments of the market.

Source: RER , The European EMS Industry – A Strategic Study of the European EMS Industry 2014-2019

The transfer of production to manufacturing facilities in  CEE/MENA to reduce costs and  the increasing demand by OEMs for EMS to offer local manufacturing in key global markets will dampen growth in Western Europe during the period to 2019.

The reverse applies to CEE/MENA where growth will be boosted by the transfer of production from Western Europe and in particular, lower volume high mix products in the ADAMCIT segments. This is expected to be offset in part by the migration of higher volume products in the consumer, computing and communications, or 3C, segment to Asia as the major global EMS companies come under increasing pricing pressure.  Assuming that the leading global EMS providers remain committed to retaining a major manufacturing presence in the region revenues are forecast to reach Euro 16.21 billion by 2019, up from Euro 15.15 billion in 2014

Major EMS Players

Although made up of over 1,000 companies, the industry is dominated by a small number of Global players with the Top 3 – Foxconn, Flextronics and Jabil – accounting for around 44.5% of revenues in 2014, with nearly 90% from plants in CEE focused on  the 3C segment.

Approaching 75% of the total sales (Euro 19.1 billion) are achieved by the leading 50 companies or 5% of the total number. We are expecting that there will be further consolidation across the industry due to the downward price pressure, slow economic growth and requirement to broaden and deepen the design, development and aftercare services to customers.

This comprehensive report provides:

• A detailed market analysis to 2019 for Western Europe, CEE and North Africa in a single report.


• A breakdown of the market by major sector.


• An in-depth analysis and comment on the key market trends impacting the European EMS Industry.


• A ranking and detailed profiles of the Top 20 EMS providers in Europe.


• An overview of electronic production and EMS manufacturing in the major countries and regions including a ranking of the leading companies and profiles of the major players.


• A directory by country of the EMS manufacturing locations with addresses, contact numbers, websites.

An appendix with the estimated sales turnover for 2014 of the Top 50 European EMS providers and the Top 50 European EMS companies based on global revenues and a list of the prevailing and historical currency exchange rates.

The European EMS Industry report allows you to track these developments in a single cost-effective study providing both detailed market and company analysis. The eleventh edition of the European EMS industry report, published by Reed Electronics Research, highlights the issues impacting the European EMS industry.

Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site: The European EMS Industry – A Strategic Study of the European EMS Industry 2014-2019.

 

European EMS Market Analysis

200 Million Smart Home Safety and Security Devices by 2020

ELECTRONICS.CA PUBLICATIONS announces the availability of a new report entitled “Smart Home Safety & Security – A Market Dynamics Report”.  According to this report, competition is intensifying for smart home service providers. This market research report covers the global IP security/smart home market as well as smart home safety and security products and services in the managed services, retail and professional installer channels. 

“Cloud-based open platforms are disrupting and creating new opportunities for smart home services,” said Mareca Hatler ON World’s research director. “Consumers are demanding greater choices as well as lower costs and smart home service providers are responding through strategic alliances and open source initiatives.”

ON World’s recently completed survey with 1,000 U.S. adults found that 30% are likely to adopt a smart home system within three years. Over half would like to have at least two integrated smart home applications and 60% of these would like three or more integrated applications. For half the respondents, safety and security is the primary reason they would adopt a smart home system.

Consumers are most satisfied with smart garage door openers, motion sensors and door locks, according to ON World’s evaluation of 170 smart home safety and security products with 20,000 product reviews. Some of the fastest growing product segments include video doorbells, smart smoke detectors and multi-purpose motion sensors.

Open source initiatives such as the AllSeen Alliance, OIC and mozaiq operations aim to accelerate smart home IoT product development and ensure interoperability across applications and transport layers. The AllSeen Alliance has grown rapidly over the past two years with over 100 members including smart home software, hardware and platform market leaders and innovators such as AT&T, Cisco, D-Link, Icontrol Networks, Legrand, LG, Honeywell, Iris by Lowe’s, Microsoft, Muzzley and Technicolor.

By 2020, there will be 200 million Internet connected wireless smart home security and safety products installed worldwide. At this time, 53% will be sold through managed services providers down from three quarters this year as sales through the retail/DIY channel will increase faster.

“Smart Home Safety & Security – A Market Dynamics Report” covers the global IP security/smart home market including safety, security, HVAC/energy, lighting controls and others as well as 12 smart home safety and security product segments for the managed services, retail/DIY and professional installer channels. It includes the results from a survey with 1,000 U.S. consumers; an evaluation of 170 products and 20,000 reviews; a competitive analysis; and 6-year global forecasts for installed systems and devices, revenues for equipment, software and services, and annual unit shipments by market, product segment and technology.

Smart Home Safety & Security – A Market Dynamics Report

Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site.  View Report Contents: “Smart Home Safety & Security – A Market Dynamics Report”.

200 Million Smart Home Safety and Security Devices by 2020

What is New in IPC Standards A-610F-WAM1 & J-STD-001F-WAM1 ?

In order to keep up with industry demand, IPC has released amendments for J-STD-001F, Requirements for Soldered Electrical and Electronic Assemblies, and IPC-A-610F, Acceptability of Electronic Assemblies. For each standard, IPC-A-610F Amendment 1 and IPC J-STD-001F Amendment 1 represents a critical shift to deliver necessary updates to these already robust standards.

In order for a standard to be successful, it needs to grow and evolve with industry demand. To achieve this, IPC has released two new amendments that address evolving manufacturing requirements. The first amendment is for J-STD-001F, Requirements for Soldered Electrical and Electronic Assemblies. This standard is recognized worldwide as the sole industry-consensus standard covering soldering materials and processes, including support for both traditional solder alloys and for lead-free manufacturing.

The second amendment is for IPC-A-610F, Acceptability of Electronic Assemblies. This widely used standard is a must for all quality assurance and assembly departments. This standard illustrates industry-accepted workmanship criteria for electronics assemblies through detailed statements reflecting acceptable and defect conditions.

For each standard, IPC-A-610F Amendment 1 and IPC J-STD-001F Amendment 1 embodies a critical shift to deliver necessary updates to these already robust standards. Both amendments tackle a variety of issues manufactures are currently facing in the electronics industry.

Included with this is the reintroduction of the Space Shuttle symbol to show where there are different criteria in the J-STD-001FS, Space Applications Electronic Hardware Addendum to IPC J-STD-001F. Other topics range from vertical hole fill to BGA voiding, as well as the revision of Class 2 requirements for vertical solder fill on plated through holes with less than 14 leads to include requirements when there is a connected internal thermal plane. The amendments also work toeliminate requirements for BGA voiding for BGA components with noncollapsing balls.

IPC-A-610 Revision F with Amendment 1 and J-STD -001 Revision F with Amendment 1, where the Amendment 1 is incorporated into the document, are being released in this new format for customers who want the criteria presented in one document. To make it clear, the documents in this format are not redline documents and do not show where the changes were made from Revision F to the Amendment.

In both instances, the emphasis is on quality.  These IPC documents can be purchased from Electronics.ca Publications as a Printed Copy, or PDF download with single user, site user, or global user license:

A-610F-WAM1, Acceptability of Electronic Assemblies Revision F with Amendment 1 (NEW FORMAT)

J-STD-001F-WAM1, Requirements for Soldered Electrical and Electronic Assemblies Revision F with Amendment 1 (NEW FORMAT)

What is New in IPC Standards A-610F-WAM1 & J-STD-001F-WAM1 ?

New IPC Standards For Printed Circuit Boards

NEW IPC-A-610F Acceptability of Electronic Assemblies

IPC-A-610 is the most widely used standard for circuit board production in the world. IPC-A-610F illustrates acceptability requirements for electronic assemblies with over 814 colour images and illustrations. Topics include flex attachment, board in board, part on part, lead free, component orientation and soldering criteria for through-hole, SMT (new termination styles) and discrete wiring assemblies, mechanical assembly, cleaning, marking, coating, and laminate requirements. This revision F includes two new SMT termination styles, and changes in plated-through hole fill and BGA void criteria. Major topics include flex attachment, board-in-board, part-on-part, both lead-free and tin-lead criteria, component orientation and soldering criteria for through hole, SMT, cleaning, marking, coating and laminate requirements. IPC Standards for printed circuit boards: order and download IPC A-610F

IPC-A-610 is invaluable for all inspectors, operators and trainers. Revision F has 814 photos and illustrations of acceptability criteria — 86 of them new or updated. The document is most often used with the material and process standard IPC J-STD-001.

NEW J-STD-001F Requirements for Soldered Electrical and Electronic Assemblies

J-STD-001F is recognized worldwide as the sole industry-consensus standard covering soldering materials and processes. This revision includes support for both traditional solder alloys and for lead-free manufacturing. Revision to plated-through hole, PTH, minimum fill requirements; criteria for two new SMT termination types; and expanded conformal coating criteria. Clarification of criteria descriptions for easier understanding. The requirements for all three classes of construction are included. Full color illustrations are provided for clarity. This standard fully complements IPC-A-610F and is supported by IPC-HDBK-001. Order and  download IPC J-STD-001F

IPC-7527 Requirements for Solder Paste Printing

IPC-7527 covers the many aspects of solder paste application, from initial placement on the board through production and testing. To equipment operators, the new standard serves as a reference guide with more than 50 photos packed into the 15-page standard.  IPC-7527 provides the operators with a standard that will help them make the right decisions when they face issues in production, and no professionals or specialists are present.

While there are standards that detail what a completed assembly should look like, IPC-7527 is the first one to provide requirements for what the printed solder paste should look like and how far off centers can be before they’re considered defects. It covers everything from basic squeegees to jet dispensers and needle dispensers to closed print heads. In addition, IPC-7527 provides information on automated paste inspection using either cameras or lasers. Order and download IPC-7527.

IPC-7093 Design and Assembly Process Implementation for Bottom Termination components

This standard describes the design and assembly challenges for implementing Bottom Termination surface mount Components (BTCs) whose external connections consist of metallized terminals that are an integral part of the component body. The BTCs in this document include all types and forms of bottom-only termination components intended for surface mounting. This includes such industry descriptive nomenclature as QFN, DFN, SON, LGA, MLP and MLF. The focus of the information is on critical design, assembly, inspection, repair, and reliability issues associated with BTCs.

The target audiences for this document are managers, design and process engineers, and operators and technicians who deal with the electronic design, assembly, inspection and repair processes. The intent is to provide useful and practical information to those companies who are using or considering tin/lead, lead free, adhesives or other forms of interconnection processes for assembly of BTC type components. Although not a complete recipe, the document identifies many of the characteristics that influence the successful implementation of robust and reliable assembly processes and provides guidance information to component suppliers regarding the issues being faced in the assembly process. Order and  download IPC-7093

IPC-7095C Design and Assembly Process Implementation for BGAs

Implementing ball grid array (BGA) and fine-pitch ball grid array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095C delivers useful and practical information to anyone currently using BGAs or FBGAs. Many issues have become especially important due to the change in the alloys of the ball, the ball shape, and the attachment procedures. The major emphasis of Revision C is to provide information on some of the new mechanical failure issues such as cratering or laminate defects caused after assembly.

In addition to providing guidelines for BGA inspection and repair, IPC-7095C addresses reliability issues and the use of lead-free joint criteria associated with BGAs. There are many photographs of X-ray and endoscope illustrations to identify some of the conditions that the industry is experiencing in the implementation of BGA assembly processes. Order and download IPC-7095C

IPC-7711/7721B Rework, Modification and Repair of Electronic Assemblies

This guide includes everything needed for repair and rework of electronic assemblies and printed circuit boards! IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. Order and download IPC-7711/7721B.

Purchase and Download IPC Standards For Printed Circuit Boards from Electronics.ca Publications today!

Effective January 1, 2015, a price increase of 4 percent will be implemented on all standards.

 

New IPC Standards For Printed Circuit Boards

World PCB Production in 2014 Estimated at $60.2 Billion

The world market for printed circuit boards (PCBs) reached an estimated $60.2 billion in value in 2014, growing just 0.7 percent in real terms, according to IPC’s World PCB Production Report for the Year 2014. Production growth in China, Thailand and Vietnam compensated for declining PCB production in most other regions. Developed by a team of the world’s leading PCB industry analysts, the annual study is the definitive source of PCB production data, indicating the volumes and types of PCBs being made in the world’s major producing countries.

The report contains estimates of 2014 PCB production value by nine product categories and by 30 countries or sub-regions. Four categories of rigid PCBs, three categories of flexible circuits, and IC substrates are covered. The standard multilayer rigid PCB values are further segmented by those having microvia structures and those with non-microvia structures. The report also includes updates on metal-core PCBs, as well as regional trends and historical data on regional shifts in PCB production.

The data show that the worldwide rigid PCB market grew modestly in 2014, while flexible circuit growth was flat. Regional trends are also examined, including China’s slowing production growth and the spectacular growth in the PCB industries of Thailand and Vietnam.

“PCB production is an international business and the landscape continues to change,” says Sharon Starr, IPC director of market research. “Companies based in Taiwan, Japan and South Korea, are responsible for more than two-thirds of world PCB production. These and other companies around the world are powering the impressive growth of PCB production in southeast Asia.”

Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site. View Report Contents: World Printed Circuit Borads Production Report for the Year 2014.

 

 

 

World PCB Production in 2014 Estimated at $60.2 Billion

Global Printed Circuit Boards Market Data 2015

Electronics.ca Publications unearths interesting findings that may reveal golden opportunities for electronics manufacturers. Here are some of the latest discoveries of interest to PCB fabricators:

According to “Monthly IPC North American PCB Market Report” Flexible circuit orders in North America are booming this year and the forecast for the next year is for double-digit sales growth. The North American flex market has grown over the past 3 years while the rigid PCB market has shrunk. Globally, the flex market is now estimated at over $10.2 billion. Yet, U.S. production accounts for only 3.4 percent of the world’s flexible circuits.

The monthly North American PCB Market Report provides timely data on PCB market size, sales and order growth, book-to-bill ratios and near-term forecasts. Data are reported for rigid PCBs and flexible circuits separately. The rigid PCB data are further segmented by company size tiers, and flex data includes trends in bare circuit versus assembly revenue sources. Trends in sales of boards to the military and medical markets are reported for both rigid and flex, as well as trends in prototype sales.

According to Global and China FPCB (Flexible Printed Circuit Board) Industry Report, 2014 was a bumper year for most FPCB companies, and the output value of the entire PCB industry reached USD12.5 billion, rising by 10.5% from the previous year. In 2015, the prices of bulk commodities (particularly the copper price) plummet, which will greatly reduce the raw material costs of PCB companies and help raise their profitability. Larger screen size of mobile phone requires larger FPCB. The FPCB market is expected to grow 8.6% in 2015 as the smartphone market can not continue its rapid growth and the tablet PC is in recession.

In 2014, the euro, the NTD and the yen significantly devalued, while the South Korean won appreciated, which not only hit a serious blow to the competitiveness of South Korean FPCB enterprises, but minified the profit of South Korean PCB enterprises. The revenue and profit margin of all South Korean PCB companies declined, for example, Flexcom’s revenue slumped by more than 50%, the giant Interflex’s revenue dropped 33% and its operating margin turned to be the negative 14.2%, which showed the power of the currency war.

Benefiting from the currency depreciation, Taiwanese and European companies witnessed soaring profit margins. More than half of Japanese companies did not benefit from the depreciation of the yen because they set up production bases overseas, but still better than South Korean companies.

In the downstream market, the biggest change in 2014 lied in: HDD saw the first growth after three consecutive years of decline. The global HDD shipment amounted to 564 million units, an increase of 2.4% from 2013. Previously, insiders were optimistic about the prospect of SSD instead of HDD; but actually, the SSD price remained high, the tablet PC market decayed, while the laptop computer market recovered to growth after three consecutive years of downturn. At the same time, the development of SSD did not restrict HDD; the new network economy and the big data era stimulated the demand for servers and HDD. HDD will still be the mainstream in the next three to five years, and the HDD shipment is expected to reach 621 million units in 2019. Japanese companies focusing on HDD-use FPCB performed exceedingly well in 2014, for example, the leader NOK (Mektron) achieved the revenue growth rate of 28% and the operating margin of 8.7% (rising from the negative 10.6%), Nitto’s revenue surged by 31%.

The competitiveness of South Korean and American companies weakened significantly. The strong USD made MFLEX’s revenue fall dramatically. The depreciation of NTD facilitated Taiwanese companies to grow by leaps and bounds; meanwhile, Apple greatly reduced orders from South Korean companies, while placed more orders with Japanese and Taiwanese companies in accordance with the principle of the nearest supply. The revenue of ZDT under Foxconn soared 60% in 2014.

 

Global Printed Circuit Boards Market Data 2015

PCB Industry Results for September 2015

North American PCB Sales Growth Continues

IPC — Association Connecting Electronics Industries® announced today the September findings from its monthly North American Printed Circuit Board (PCB) Statistical Program. Sales growth continued in September and the book-to-bill ratio fell back to a more normal but still positive 1.05.

Total North American PCB shipments increased 3.3 percent in September 2015 compared to September 2014. Year-to-date shipment growth finally reached positive territory at 0.3 percent, after struggling to overcome negative sales growth rates seen earlier this year. Compared to the previous month, PCB shipments were up 12.1 percent.

PCB bookings decreased 2.0 percent compared to September 2014, reducing year-to-date order growth to 5.2 percent. Orders were down 7.4 percent in September compared to the previous month.

“The North American PCB industry continues to see modest but positive sales growth, the result of strong order growth in most months of 2015. Orders contracted in September bringing the book-to-bill ratio down from a 5-year high in August to a more moderate level,” said Sharon Starr, IPC’s director of market research. “The book-to-bill ratio remains positive for the 12th consecutive month,” she added, “which is a strong indicator of positive sales growth in the fourth quarter of this year and into next year.”

Detailed Data Available

The next edition of IPC’s North American PCB Market Report, containing detailed September data from IPC’s PCB Statistical Program, will be available within the next week. The monthly report presents detailed findings on rigid PCB and flexible circuit sales and orders, including separate rigid and flex book-to-bill ratios, military and medical market growth, demand for prototypes, and other timely data.

Interpreting the Data

The book-to-bill ratios are calculated by dividing the value of orders booked over the past three months by the value of sales billed during the same period from companies in IPC’s survey sample. A ratio of more than 1.00 suggests that current demand is ahead of supply, which is a positive indicator for sales growth over the next three to six months. A ratio of less than 1.00 indicates the reverse.

Year-on-year and year-to-date growth rates provide the most meaningful view of industry growth. Month-to-month comparisons should be made with caution as they reflect seasonal effects and short-term volatility. Because bookings tend to be more volatile than shipments, changes in the book-to-bill ratios from month to month might not be significant unless a trend of more than three consecutive months is apparent. It is also important to consider changes in both bookings and shipments to understand what is driving changes in the book-to-bill ratio.

IPC’s monthly PCB industry statistics are based on data provided by a representative sample of both rigid PCB and flexible circuit manufacturers selling in the USA and Canada. IPC publishes the PCB book-to-bill ratio at the end of each month. Statistics for the current month are available in the last week of the following month.

Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site.  View Report Contents: IPC’s North American PCB Market Report. Electronics.ca Publications is an IPC member and authorized distributor of IPC industry standards, workforce training products, and market research reports.

 

PCB Industry Results for September 2015

U.S.A. Electronic Security Product Demand to Exceed $16 Billion in 2019

Demand for electronic security products in the US is projected to rise 7.0 percent annually through 2019 to $16.2 billion.

Strengthening new construction expenditures following the recession-impacted 2009-14 period will drive gains. A heightened perceived risk of crime due to widespread media coverage will also support gains, even as the actual number of crimes has declined in recent years. Technological advances will promote sales gains in all segments, both by providing a boost to value demand via the incorporation of value-added features and by increasing market penetration.

These and other trends are presented in the new study Electronic Security Products. This study represents a unique combination of the research skills and resources of The Freedonia Group and the security industry insight of the Security Industry Association (SIA) and its members.

Demand for video surveillance products and systems designed for use in security-related settings will advance 8.2 percent annually, the fastest growth of the five primary electronic security product categories. In 2014, there were approximately 35 million total video surveillance security cameras installed and in use in the United States. That number will continue to expand for the foreseeable future as market penetration increases and as locations add more cameras to their existing surveillance systems.

Access control systems will see strong gains as smart card-based systems gain traction over less secure technologies such as proximity and magnetic stripe cards. Access control systems that integrate increasingly advanced layers of credentials, such as mobile phones and biometrics, will support further gains. Rising consumer familiarity with biometric systems, driven by the use of biometric technologies in identification applications, will help promote demand for the small but rapidly growing biometric access control segment. Improvements in reliability and efficiency of biometric devices, coupled with falling prices, will further aid adoption.

Interoperability as well as innovations in mobile monitoring will boost demand for alarms, which accounted for the largest share of sales in 2014. “The increasing array of plug-and-play electronic security devices that are self-monitored will expand the potential market base of consumers willing to purchase supplemental security measures,” notes analyst Katherine Brink. “These smart products are controlled and accessed via mobile devices, aiding security equipment sales as interest in smart home automation systems also rises.” The alarm segment will further benefit from innovations in personal emergency response service (PERS) alarms.

US ELECTRONIC SECURITY PRODUCT DEMAND (million dollars)
% Annual Growth
Item	2009	2014	2019	2009- 2014	2014- 2019
Security Product Demand	9445	11550	16200	4.1	7.0
Alarms	2725	3375	4750	4.4	7.1
Access Controls	2850	3145	4470	2.0	7.3
Video Surveillance	2135	3075	4555	7.6	8.2
Contraband Detection	1140	1355	1675	3.5	4.3
Electronic Article Surveillance	426	400	485	-1.3	3.9
Other	169	200	265	3.4	5.8

Source: Freedonia Electronic Security Products study

(published 11/2015, 424 pages) is available from Electronics.ca Publications.

 

U.S.A. Electronic Security Product Demand to Exceed $16 Billion in 2019

Surging Demand for CCTV and Video Surveillance Systems Drives the Electronic Security Systems Market

ELECTRONICS.CA PUBLICATIONS announces the availability of new market research studies which cover CCTV and Video Surveillance Systems, and comprehensive analysis of industry segments, trends, growth drivers, market share, size and demand forecasts on the Global Electronic Security Systems (ESS) market. The global market for Electronic Security Systems is projected to exceed US$80 billion by 2020, driven by the surging demand for CCTV and video surveillance systems and the critical need to restrict unauthorized entry and access amid escalating security concerns. 

Electronic Security Systems, CCTV and Video Surveillance Market

Electronic Security represents the use of technology and electronic devices for ensuring safety and security of human life, physical assets, and business operations by tracking and preventing unauthorized access to restricted premises, sensitive data, or high value assets. As key enablers of advanced electronic security, alarms, electronic access controls systems (EACS) and CCTV and Video surveillance systems have been well received by security conscious individuals, commercial establishments, and governments across the world. Rise in terrorist attacks, vandalism, campus violence, and the resulting need for personal safety, and security at public places such as transits, city centers, educational institutions, as well as borders have been driving the ESS market over the years. Other factors benefiting market growth include heightened levels of fear over security among individuals, stringent regulatory mandates, recovering new building constructions, and surging demand for technologically superior yet cost effective products.

Future growth in the market will be driven by societal changes, which will continue to trigger security threats like terrorist attacks, racism, and fascism. Also, the changing nature of crime in the form of online fraud, identity theft, internet related crimes, property theft, and vandalism will throw the spotlight on the need for advanced electronic security solutions such as digital CCTV, IP based video surveillance, remote-monitoring systems, and IP based access control systems. Falling prices; ever expanding product range; favourable legal, social and political perspectives; migration from analog to IP-based video surveillance; surging investments in government security projects; rapid proliferation of HD CCTVs, rising need to restrict unauthorized entry and access; integration of multiple technologies; expanding applications of biometrics EACS; and the power of cloud computing in enabling security software as a service, are also expected to benefit market expansion in a big way in the coming years.

As stated by the new market research report on Electronic Security Systems (ESS), the United States represents the largest market worldwide, followed closely by Europe. Rise in events of security infringement, significant upgrading and integration of highly advanced security systems by commercial and residential buildings, and rising government and enterprise focus on safeguarding human life, physical and digital assets, and infrastructure, represent key growth drivers in developed markets. Asia-Pacific ranks as the fastest growing market with a CAGR of 14% over the analysis period. Growing prominence of Asian countries as a manufacturing hub for electronic security systems, robust construction activity driven by healthy gains in GDP growth, rising disposable incomes of an expanding base of middle class population, and growing number of civil infrastructure projects, among others, represent key growth drivers in the region.

Key players covered in the report include ADT LLC, Allegion plc, ASSA ABLOY AB, Axis Communications AB, Bosch Security Systems, Changzhou Minking Electronics Co., Ltd., Fermax Electronica S.A.U., Global Security Solutions, Gunnebo AB, Hanwha Techwin, Hikvision Digital Technology Co., Ltd., Honeywell International Inc., Huviron Co., Ltd., Identive Group, Inc., Johnson Controls, Inc., Kaba Group, Mobotix AG, Panasonic Corporation, Schneider Electric, SAFRAN Group, Sony Electronics, Inc., Swann Communications Pty. Ltd., Toshiba America, Inc., Tyco International Ltd., UTC Building and Industrial Systems, Yoko Technology Corp., and Zhejiang Dahua Technology Co., Ltd., among others.

The research report provides a comprehensive review of market trends, issues, drivers, mergers, acquisitions and other strategic industry activities of global companies. The report provides market estimates and projections in value for the US, Canada, Japan, Europe (France, Germany, Italy, UK, Spain, Russia, and Rest of Europe), Asia-Pacific (China, India, and Rest of Asia-Pacific), Latin America (Brazil, and Rest of Latin America), and Rest of World. Product segments analyzed in the report include Alarms, Electronic Access Control Systems (EACS), CCTV and Video Surveillance Systems, and Others.

Details of  2 new reports, table of contents and ordering information can be found on Electronics.ca Publications’ web site.

View Report Contents for:

• CCTV and Video Surveillance Systems – Global Strategic Business Report
  and


• Electronic Security Systems – Global Strategic Business Report

 

Surging Demand for CCTV and Video Surveillance Systems Drives the Electronic Security Systems Market

Key Nano-technologies and Markets 2015-2016

Nanotechnology and nanomaterials are key enablers for a whole new generation of products and processes. New products with enhanced properties are coming onto the market from a broad range of players in consumer electronics, packaging, healthcare and coatings.

The Nanotech Review 2015-2016 is a comprehensive guide to materials, markets and products in nanotech over the past 12 months, from January 2015 to January 2016. This publication details leading developments within the industry during this period.

2015 witnessed numerous major advances enabled by nanotechnology in consumer electronics, medicine and coatings technology. Quantum Dot TVs have made a huge market impact and global funding and commercialization of graphene has continued to grow.

The Nanotech Review focuses on the leading nanomaterials under development, with coverage on quantum dots, nanocoatings, graphene, nanocellulose and new 2-D nanomaterials. There are contributions from leading nanotech companies, alliowing readers a unique market insight into these exceptional materials.

This publication provides a comprehensive review the state of the nanotech sector at present, it’s development, and future prospects. Strategic analysis of the key global markets nanotech will impact is the core theme.

Our expert team and industry contributors bring you fascinating, authoritative articles, illustrated with stunning images on nanotech in markets from oil & gas to biomedicine & healthcare.

Key Nano-technologies and Markets

Key Nanomaterials Markets

• Nanomaterials in the Li-ion battery market


• Quantum Dot TVs


• Graphene in flexible displays


• Graphene in 3D printing


• Graphene in biomedicine


• Graphene in coatings


• Nanomaterials in the Wound Management Market


• Nanotech in Food Packaging


• Nanotech in Anti-counterfeit Applications


• Nanomaterials in Threat Detection and Prevention


• Anti-reflective nanocoatings

Key Nanomaterials

• Quantum Dots


• Graphene conductive inks


• Graphene transparent films


• 2D Nanomaterials beyond graphene

Key Industry Developments in the last 12 months

• Graphene industry developments


• Nanomedicine industry developments


• Nanomaterials regulation


• Carbon nanotubes industry developments


• Nanowires industry developments


• Quantum dots industry developments


• Nanocoatings industry developments


• Nanoenergy industry developments


• Nanocellulose industry developments

Learn more about nanotechnology and nanomaterials market and publications that provide informed perspective and relevant analysis of emergent technologies.

 

Key Nano-technologies and Markets 2015-2016