Wednesday, May 13, 2015

Wireless Charging ICs Market Report

The First Edition analysis of the Wireless Charging Market is an in-depth analysis detailing the latest developments in this important emerging market. The wireless power charging IC market will see tremendous growth over the next five years, with a dollar market increasing from $284.3 million in 2015 to over $2.8 billion in 2020, a compounded annual growth rate (CAGR) of 58.7%. The wireless power charging market covered in this report is made up of both wireless charging receiver ICs and transmitter ICs. But the longer-term market growth is still uncertain.


“While wireless charging is rapidly gaining market share, its continued success and the final size of the wireless charging market is still to be determined,” stated Richard Ruiz, analyst and author of this report. “There are a number of significant factors that could derail this emerging market including the continued uncertainty of the standards environment, especially the on-going development of a new standard by IEEE and the uncertainty regarding the efficacy of wireless charging relative to energy efficiency standards such as the California Energy Commission (CEC), Level V, that mandates ac adapters meet a minimum efficiency of 85%. It remains to be seen if wireless charging technology can meet this requirement. For these and other reasons, wireless charging is not a ‘done deal’,” Ruiz concluded. The elimination of the need to maintain multiple external power supplies, one for each electronic device, has long been a goal for both the consumers and manufacturers of consumer electronics equipment and over the past several years there have been a number of developments moving the industry towards this goal. In the medium- and longer-terms, the differing growth rates for transmitters and receivers will have a significant impact on the opportunities for companies offering wireless charging. For example, in 2015, the receiver units market is over three times as large and by 2020 it is almost five times larger. This spread will continue to grow as both markets approach different saturation levels and different long-term growth rates.


Additional forecasts in this report include both low and medium power receiver and transmitter ICs for both Wireless Power Consortium Qi technology and A4WP technology. Driven by the large mobile phone market, over the forecast period the receiver IC market is projected to be dominated by Qi technology, while the transmitter IC market will have a higher percentage of A4WP technology. For the purpose of this report, the A4WP and PMA products have been combined.


Among the additional areas to watch are advances in IC technology, in particular advanced semiconductor developments which are moving towards circuits with dual-mode wireless power capability, components and materials, and advances in digital power technology. Also important to observe are a number of long-term alliances and partnerships as well as developments in standards and regulations, efficiency and standby power requirements and the clear long-term shift from first generation (tightly-coupled) to second-generation (flexibly-coupled) wireless power transfer technologies.


Wireless Charging ICs Market Report


Wireless Charging MarketThis 106-page report contains over 45 tables, graphs and illustrations covering the wireless charging market, including a market share for key suppliers. The focus of this comprehensive analysis is to provide decision makers and manufacturers and operations with a detailed and insightful look at the current and future opportunities available in the wireless charger IC market. Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site.

View the report: “Wireless Charging Technology: Receiver and Transmitter ICs Worldwide Forecasts“.



 



Wireless Charging ICs Market Report

Monday, May 11, 2015

Solar Panels Markets Reach $180.7 Billion By 2021

ELECTRONICS.CA PUBLICATIONS announces the availability of a new report entitled “Solar Panels: Market Shares, Strategy, and Forecasts, Worldwide, 2015 to 2021″. The 2015 study has 537 pages, 212 tables and figures. Worldwide solar panels markets are growing as units become more efficient and less costly for generating electricity. Rapid adoption of solar panels worldwide is occurring as systems provide peak power efficiently.


The ability to remain competitive depends upon the ability to develop technologically advanced products and processes. What better investment in infrastructure on the part of a government than solar power? Cheap energy promises to provide water, cheap manufacturing, electric vehicles, all sorts of things more useful than a war that the government might alternatively spend its money on.


Main areas of solar panels is for: large scale utility systems connected to the electrical grid. Residential and commercial markets are evolving further.


Solar panel market driving forces relate primarily to the prospect of inexpensive, lasting energy from the sun. In 2015, analysts agree, a tipping point has been reached, solar panel markets are at the critical point in the market development, where an inevitability of adoption is certain. Solar panels markets have been an up and down evolving situation that was completely dependent on government subsidies.


Now the government subsidies seem certain. Market development without government subsidies seems certain. Utilities have to have solar energy. Governments have to have solar energy. People have to have solar energy. The stability of the solar panel market leads to a new and irreversible positive thrust for the market. Market development is certain to occur, the question is simply how fast.


Solar panel markets have crossed a threshold and gains will possibly have significant momentum, triggered by the technology. Solar panel adoption is now a dynamic process of innovation, insight, and influence through advocacy. The critical point in solar panel adoption is a process that is now unstoppable.


The growth of solar has been driven by a single paradigm at the federal and state levels worldwide. Now, with China so entirely dedicated to making solar less expensive than coal electrical generation, solar energy will take hold worldwide. Almost all solar has taken advantage of — and needed to take advantage of — state-level incentives.


China has had government subsidies for a long time. This continues to be the case, but in China now, grid parity is a result of taxing coal electrical generation, making solar panels attractive. The US is poised to see rapid adoption of solar panels in various regions.


According to Susan Eustis, the lead author of the team that created the study, “Solar panel market driving forces relate primarily to the prospect of inexpensive, lasting energy from the sun. In 2015, analysts agree, a tipping point has been reached, solar panel markets are at the critical point in the market development, where an inevitability of adoption is certain. Utilities have to have solar energy to meet the regulatory requirements. Governments have to have solar energy to achieve clean air standards. People have to have solar energy to charge electric cars. The stability of the solar panel market leads to a new and irreversible positive thrust for the market. Market development is certain to occur, the question is simply how fast.”


Solar panels have moved from the trial stage to the early adopter stage. Markets at $24.2 billion in 2014 are expected to reach $180.7 billion by 2021. Growth is expected to achieve rapid adoption of renewable energy.



Solar panels market sharesDetails of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site. View the report: 
“Solar Panels: Market Shares, Strategy, and Forecasts, Worldwide, 2015 to 2021“.


 



Solar Panels Markets Reach $180.7 Billion By 2021

Speciality Chemicals and Materials Will Reach Over $50 Billion in 2023

Speciality Chemicals needed for future electronics: morphologies, forms, derivatives: opportunities, trends, reasons: de-risk your investment!


According to a new study, speciality chemicals and  and materials will reach over $50 billion in 2023.  The chemistry of the new electronics and electrics is key to its future, whether it is invisible, tightly rollable, biodegradable, edible, employing the memristor logic of the human brain or possessing any other previously- impossible capability in a manufactured device. De-risking that material development is vital yet the information on which to base that has been unavailable. No more.


See how the metals aluminium, copper and silver are widely deployed, sometimes in mildly alloyed, nano, precursor, ink or other form. Understand the 12 basic compounds most widely used in the new electronics and electrics and compare them with compounds exhibiting the broadest range of appropriate electrical and optical functions for the future. Those seeking low volume, premium priced opportunities can learn of other broad opportunities. Indeed, we cover in detail all the key inorganic and organic compounds and carbon isomers. We show how the element silicon has a new and very different place beyond the silicon chip. Learn how the tailoring of a chosen, widely-applicable chemical can permit premium pricing and barriers to entry based on strong new intellectual property. For example, see which of 15 basic formulations are used in the anode or cathode of the re-invented lithium-ion batteries of 131 manufacturers and what comes next.


The chart below shows the breakdown of most popular inorganic compounds in new electronics including:


  • Aluminium compound

  • Boron compound

  • Copper compound

  • Gallium compound

  • Indium compound

  • Lithium compound

  • Manganese compound

  • Silicon compound

  • Titanium compound

  • Zinc compound

Speciality Chemicals and Materials

Most popular inorganic compounds in the new electronics by device family


For the full data set please purchase this report. Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site.  View the report: Functional Materials for Future Electronics: Metals, Inorganic & Organic Compounds, Graphene, CNT.


 


 



Speciality Chemicals and Materials Will Reach Over $50 Billion in 2023

Friday, May 8, 2015

300mm - 450mm Wafer Issues and Market Trends

300mm – 450mm Wafer Market Trends – Copper – Low-K Convergence: Timing, Trends, Issues, Market Analysis


The semiconductor industry has been increasing the size of wafers about every 10 years. In 2000, semiconductor device manufacturers migrated from 200 mm substrates to 300 mm substrates due to technological advances and manufacturing cost advantages. 300 mm wafers provide more than 2.25 times as many die per wafer, and offer significant economies of scale in the manufacturing process. Approximately 96% of 2012 net orders for wafer fabrication equipment were for 300 mm manufacturing systems. The next planned wafer size increase is expected to be up to 450 mm substrates. 


Increases in wafer sizes have been a natural evolution and manufacturing efficiency improvement for the semiconductor industry for decades, as shown in the figure below.


300mm - 450mm Wafer Issues and Market Trends


 


Throughout its history, the semiconductor industry has migrated to increasingly larger wafer sizes, from one-inch wafers to the 200mm (eight inches) standard predominant today. To gain the economic advantages of a larger surface area, the industry has began using 300mm (12 inches) wafers as the next wafer size. The surface area of a 300mm wafer is more than two times that of a 200mm wafer. 450mm wafers are on the horizon and new hardware will be needed to process 450mm wafers, although some “bridge tools” may come on the market that have dual 450mm-300mm capabilities.


Chipmakers are beginning to shift from using aluminum as the main conducting material for the interconnect circuitry to copper, which has lower resistance than aluminum and can carry more current in a smaller area. Despite the movement to copper interconnects in advanced, multilevel logic devices, most of the world’s advanced integrated circuits are still produced with aluminum/tungsten plug wiring schemes. This will continue to be the case for many years, particularly for memory and embedded memory products.


The interconnect roadmap now accepts that “reduction of the ILD к value is slowing down because of problems with manufacturability. The poor mechanical strength and adhesion properties of lower-к materials are obstructing their incorporation. Delamination and damage during CMP are major problems at early stages of development, but for mass production, the hardness and adhesion properties needed to sustain the stress imposed during assembly and packaging must also be achieved. The difficulties associated with the integration of highly porous ultra-low-κ (к ≤2) materials are becoming clearer…..the slowdown of low-к in this edition, is further reflected by delaying low-к progress by one year in light of the actual pace of deployment of new technologies.”


With CMOS scaling comes reduced sizes and spaces in which to fit interconnects, and the growing problem of increased parasitic resistance and capacitance, which degrades RF performance. Lowering gate-electrode interconnect as an input signal port in analog transistors can fix this. NEC says it has developed a low-k Cu dual-damascene contact interconnect technology, in which the insulating dielectrics are changed from silicon oxide (SiO2) to low-k dielectrics (SiOCH), and the contact metal alternated from high-resistive tungsten (W) to Cu. Burying Cu interconnect with Cu CT plugs in the low-k dielectric material over the CMOS transistor only improved RF performance by 10%, as gate-electrode interconnect resistance could not be reduced sufficiently.


Spin-on dielectrics have the benefit of less dependence on precursors than CVD, that is, one tool can handle a variety of materials, including porogen. Various spin-on low-κ materials including porous materials have been studied. However, PECVD-SiCOH has been the dominant low-κ ILD film. Non-porous spin–on materials have not been used except in some special cases. Spin-on polymer and spin-on MSQ with к ≥ 2.4 are unlikely to be used for actual logic/memory devices, consequently spin-on materials, except porous-MSQ, have been deleted from the potential solutions figure of the ITRS Roadmap.


The roadmap concedes that spin-on-organic ILD has been a total failure. What was the holy grail of chemical companies in the late 1990’s, is at last labeled a dismal failure.


The transition to 300mm fabs resulted in a huge difference in the amount of automation used for processing. There are very high levels of individual tool automation, highly integrated factory CIM systems, large usage of FOUPs and minienvironments, and automated intrabay handling systems


Automation accounts for about 6 percent of the cost of a 450-mm fab, or more than $100 million, double the automation cost burden of a 200-mm production fab.


There are several aspects of copper processing that are challenges. The common barrier layers, Ta/TaN are inert materials and not easy to polish. This has led to a two-step polishing process for removal of the copper first, followed by a second step of removing the barrier layer.


Corrosion of the metal is a problem, as copper shows a high sensitivity to corrosion.


Also, copper can poison other front-end processes, and the copper processing area needs to be isolated from the rest of the fab.


Finally, the complexity of the copper processing leads to challenges in CMP integration. The features on an IC have a variety of densities – highly dense arrays and large bond pads. Each area can polish differently. Also, there are incoming non-uniformities in the copper film, which presents a problem in across-the-wafer CMP uniformity.


The need to minimize total copper loss is critical. Copper loss comes from three areas — field oxide thinning adjacent to a copper interconnect, erosion of copper in arrays with densities up to 90%, and dishing of copper over wide lines of 10 to 100 microns. Minimization of copper loss will keep resistance variations to a minimum. As plating chemistries get more complex and porous low-k materials come on stream, the balance between high throughput and minimal copper loss becomes more critical.


CMP slurry suppliers are working at minimizing thickness variation and copper loss during processing, reducing topography through the entire IC build, and developing process consistency and process stability. Between 1997 and 2000, there was a 500% improvement in planarity by minimizing copper dishing and oxide erosion. Key is a first step slurry with improved planarization performance through engineered particles, proprietary chemicals, and process recipes, and a second step slurry that is highly tuned and highly selective.


A key issue is integration of various components into a single tool for complete deposition and processing of a copper fill. The integrated tool will combine copper fill, copper bevel clean, and copper anneal, all in one clustered tool with a significantly smaller footprint than all individual tools.


For metal barrier and seed, ALD is anticipated to be the means of barrier deposition for future geometries, penetration poses a significant integration challenge. Films created using this approach show excellent resistance to barrier intrusion, even without pore sealing. Because of its high efficiency, UV light or e-beam curing is superior to furnace curing. As the film is cured with UV or e-beam to create the homogeneous nanopores, cross-linking of the silicon oxide matrix also occurs. This improves the film’s hardness and elastic modulus (~1 and 5.8 GPa, respectively, post-treatment).


Strategies vary within the industry, and some companies are pursuing alternatives to low-k materials such as design and packaging effects to reduce capacitance.


Risk and cost management are key factors. Semiconductor manufacturers initially focused their approach on dielectric constant. Now risk and cost are drivers.


Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site.  View the report: 450mm/Copper/Low-K Convergence: Timing, Trends, Issues, Market Analysis.


 


 



300mm - 450mm Wafer Issues and Market Trends

SMT Equipment Market is Projected to Reach US$4.5 Billion by 2020

ELECTRONICS.CA PUBLICATIONS announces the availability of a comprehensive global report on Surface Mount Technology (SMT) Equipment. The global market for Surface Mount Technology Equipment is projected to reach US$4.5 billion by 2020, driven by the strong demand for electronic products and the ensuing increase in production of Printed Circuit Boards (PCBs).


The global market for Surface Mount Technology (SMT) equipment is driven by the telecommunications, computing and consumer appliances sectors, all of which are prolific users of Printed Circuit Boards (PCBs). PCBs are vital components of the omnipresent IC chip technology present in virtually all modern electronic devices. Earlier, components were mounted onto a PCB board using the “through-hole technology” either manually or by using automated insertion mount machines. However, the miniaturization trend led to significant board size reductions, making integration of electronic components onto a board a daunting task. SMT today plays a vital role in the PCB assembling process by enabling mounting of active and passive electronic components directly onto the surface of PCBs. Over the years, SMT equipment has contributed significantly towards simplifying PCB assembly operations, and enabling mass production of electronic devices.


Future growth in the market is forecast to come from emerging opportunities in automotive electronics, medical device electronics, aerospace, defense and military electronics. Adoption of advanced SMT equipment will be driven by the shifting focus of end-use markets from defect detection to defect prevention. The scenario is also creating lucrative opportunities for sophisticated SMT placement and inspection equipment. Demand for SMT inspection equipment is driven by the need to reduce resource wastages stemming from manufacturing defects, improve manufacturing processes, reduce associated costs, increase yield and enhance margins. Rising demand for light emitting diodes (LED) technology is also fuelling demand for SMT equipment. Encouraged by the growing popularity of LEDs, SMT equipment manufacturers are planning production capacity additions to accommodate the increasing demand from commercial and consumer electronics sectors.


As stated by the new market research report on Surface Mount Technology, SMT Equipment market in Asia-Pacific represents the single largest market worldwide. The region is forecast to emerge as the fastest growing market with a CAGR of 7.9% over the analysis period led by robust pace of industrialization, and growth in consumer and automotive electronics. SMT placement equipment represents the largest product market supported by the miniaturization trend and the resulting need for higher accuracy in the placement of semiconductor active components such as transistors and diodes, among others. In the SMT Inspection Systems market, Automatic X-Ray Inspection (AXI) Equipment and Automatic Optical Inspection (AOI) Equipment are expected to witness strong growth. AXI equipment is expected to benefit from the integration of computer tomography and intuitive programming.


Major players in the market include ASM Assembly Systems GmbH & Co. KG, Assembléon Netherlands BV, Conceptronic, CyberOptics Corporation, Electro Scientific Industries, Fuji Machine Manufacturing Co. Ltd., Glenbrook Technologies Inc., Heller Industries Inc., Juki Corporation, Kabushiki Kaisha Hitachi Seisakusho (Hitachi, Ltd), Koh Young Technology Inc., Mycronic AB, Nikon Metrology NV, Nordson Corporation, Omron Corporation, Orbotech, Ltd, Panasonic Corporation, Saki Corporation, Speedline Technologies Inc., Teradyne Inc ., Test Research Inc., Universal Instruments, Viscom AG, and YXLON International GmbH among others.


SMT Equipment Market ReportThe research report titled “Surface Mount Technology (SMT) Equipment: A Global Strategic Business Report”, provides a comprehensive review of market trends, issues, product innovations/introduction, mergers, acquisitions and other strategic industry activities. The report provides market estimates and projections in US Dollars for all major geographic markets including the US, Europe, Asia-Pacific, and Rest of World (Canada, Latin America, the Middle East and Africa). Product markets analyzed include Screen Print Equipment (Manual, Semiautomatic, and Automatic), Placement Equipment (High-Speed, Medium-Speed, and Low-Speed), Soldering Equipment (Reflow Oven, and Wave Oven), Cleaning Equipment, Inspection Equipment (Optical, X-Ray, and Laser), and Repair and Rework Equipment (Manual, and Semiautomatic).



SMT Equipment Market is Projected to Reach US$4.5 Billion by 2020

Soaring Sales of Consumer Electronic Devices Drives Growth in the Consumer Batteries Market

ELECTRONICS.CA PUBLICATIONS announces the availability of a comprehensive global report on Consumer Batteries markets. Global market for Consumer Batteries is projected to reach US$40.8 billion by 2020, driven by booming sales of consumer electronic devices and technology innovation in battery chemistries.


Market Research Report on Consumer Batteries


Batteries are ubiquitous energy storage devices that find application as an indispensable power source in consumer electronic products like home electronics, mobile devices, hearing aids, video game controls, cordless phones, camcorders, and cameras among others. Robust market for mobile phones and other digital consumer electronic products holds great potential for batteries. Arrival of numerous power hungry consumer electronic devices is spelling opportunities for efficient and long-lasting batteries. Demand in the market will continue to be fueled by the development of technologically advanced products, such as 3D TVs, smart remotes, tablets, and mobile phones.


Data hungry and energy-hogging consumer electronics will provide battery manufacturers with recurring sales and opportunities. Battery manufacturers are therefore focusing resources on researching and developing battery systems capable of meeting the ever growing power requirements of the digital world. Development of newer battery chemistries promises to bring in improvements in performance, reliability, durability, and efficiency. Growing need for high performance integrated battery solutions for use in rugged mobile computing platforms is additionally driving investments in R&D.


Secondary batteries, comprising Nickel Cadmium (NiCad), Nickel Metal Hydride (NiMH), and Lithium-Ion (Li-ion) based batteries,ominate the market. Given their varying technological lineage, the market prospects for each of these technologies differ substantially. NiCad battery technology is weighed down by environmental concerns over cadmium toxicity in addition to facing stiff competitive threat from other advanced competing technologies. Market shares of NiCad and Ni-MH are expected to gradually decline, as adoption of Li-ion increases. Additionally, NiCd and Ni-MH are also expected to feel the heat of the arrival of new chemistries such as Nickel-zinc and Silver-zinc in the market. Large-area polymer batteries and wide prismatic batteries exhibit strong growth prospects on the back of accelerating demand for high-end IT products such as smartphones, tablet PCs and ultrabooks, which require slim, lightweight and high-capacity batteries.


Lithium-ion is the most exciting battery chemistry in the market with growth supported by growing demand for portable consumer products. The expanding base of smartphone users worldwide is expected to especially benefit the market. With “innovation” becoming a key driver of growth, manufacturers are investing heavily in the development of smaller and thinner Li-Ion batteries. In the primary batteries market, long-term growth is forecast to be led by the transition from Zinc-carbon to alkaline.


As stated by the new market research report on Consumer Batteries, Asia-Pacific represents the largest and the fastest growing market worldwide. Growth in the region is led by China. China is currently the largest producer and one of the leading consumers of Li-ion batteries globally. The United States represents the second largest market with growth supported by continuous upgrades and innovations in product design, and strong replacement demand.


Major players in the market include Battery Technologies Inc., BYD Company Ltd., Electrochem Automation Inc., Energizer Holdings Inc., FDK Corp., GP Batteries International Ltd., Hitachi Maxell Ltd., Jiangmen TWD Technology Co. Ltd., LG Chem Co. Ltd., Panasonic Corp., Sanyo Electric Company Ltd., Procter & Gamble Company, Samsung SDI Co. Ltd., Sony Corp., Spectrum Brands Inc., VARTA Consumer Batteries GmbH & Co. KgaA, Tronic Technology Global Ltd., and Ultralife Batteries Inc., among others.


The research report titled “Consumer Batteries – Global Strategic Business Report”, provides a comprehensive review of market trends, growth drivers, new product introductions, and other strategic industry activities of major global players. The report provides market estimates and projections in US dollars for all major geographic markets including US, Canada, Japan, Europe (France, Germany, Italy, UK, Spain, Russia, and Rest of Europe), Asia-Pacific (China, India, South Korea, and Rest of Asia-Pacific), Middle East, and Latin America (Brazil and Rest of Latin America). Product markets analyzed include Primary Batteries (Zinc Carbon, Alkaline, and Primary Lithium) and Secondary Batteries (Nickel Cadmium, Nickel Metal Hydride, Lithium Ion, and Other secondary batteries).


market research report on consumer batteries

Market Research Report on Consumer Batteries


Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site.  View Complete Report Details: “Consumer Batteries – Global Strategic Business Report“




Soaring Sales of Consumer Electronic Devices Drives Growth in the Consumer Batteries Market

Wednesday, May 6, 2015

300mm - 450mm Wafer Issues and Market Trends

300mm – 450mm Wafer Market Trends – Copper – Low-K Convergence: Timing, Trends, Issues, Market Analysis


The semiconductor industry has been increasing the size of wafers about every 10 years. In 2000, semiconductor device manufacturers migrated from 200 mm substrates to 300 mm substrates due to technological advances and manufacturing cost advantages. 300 mm wafers provide more than 2.25 times as many die per wafer, and offer significant economies of scale in the manufacturing process. Approximately 96% of 2012 net orders for wafer fabrication equipment were for 300 mm manufacturing systems. The next planned wafer size increase is expected to be up to 450 mm substrates. 


Increases in wafer sizes have been a natural evolution and manufacturing efficiency improvement for the semiconductor industry for decades, as shown in the figure below.


300mm - 450mm Wafer Issues and Market Trends


 


Throughout its history, the semiconductor industry has migrated to increasingly larger wafer sizes, from one-inch wafers to the 200mm (eight inches) standard predominant today. To gain the economic advantages of a larger surface area, the industry has began using 300mm (12 inches) wafers as the next wafer size. The surface area of a 300mm wafer is more than two times that of a 200mm wafer. 450mm wafers are on the horizon and new hardware will be needed to process 450mm wafers, although some “bridge tools” may come on the market that have dual 450mm-300mm capabilities.


Chipmakers are beginning to shift from using aluminum as the main conducting material for the interconnect circuitry to copper, which has lower resistance than aluminum and can carry more current in a smaller area. Despite the movement to copper interconnects in advanced, multilevel logic devices, most of the world’s advanced integrated circuits are still produced with aluminum/tungsten plug wiring schemes. This will continue to be the case for many years, particularly for memory and embedded memory products.


The interconnect roadmap now accepts that “reduction of the ILD к value is slowing down because of problems with manufacturability. The poor mechanical strength and adhesion properties of lower-к materials are obstructing their incorporation. Delamination and damage during CMP are major problems at early stages of development, but for mass production, the hardness and adhesion properties needed to sustain the stress imposed during assembly and packaging must also be achieved. The difficulties associated with the integration of highly porous ultra-low-κ (к ≤2) materials are becoming clearer…..the slowdown of low-к in this edition, is further reflected by delaying low-к progress by one year in light of the actual pace of deployment of new technologies.”


With CMOS scaling comes reduced sizes and spaces in which to fit interconnects, and the growing problem of increased parasitic resistance and capacitance, which degrades RF performance. Lowering gate-electrode interconnect as an input signal port in analog transistors can fix this. NEC says it has developed a low-k Cu dual-damascene contact interconnect technology, in which the insulating dielectrics are changed from silicon oxide (SiO2) to low-k dielectrics (SiOCH), and the contact metal alternated from high-resistive tungsten (W) to Cu. Burying Cu interconnect with Cu CT plugs in the low-k dielectric material over the CMOS transistor only improved RF performance by 10%, as gate-electrode interconnect resistance could not be reduced sufficiently.


Spin-on dielectrics have the benefit of less dependence on precursors than CVD, that is, one tool can handle a variety of materials, including porogen. Various spin-on low-κ materials including porous materials have been studied. However, PECVD-SiCOH has been the dominant low-κ ILD film. Non-porous spin–on materials have not been used except in some special cases. Spin-on polymer and spin-on MSQ with к ≥ 2.4 are unlikely to be used for actual logic/memory devices, consequently spin-on materials, except porous-MSQ, have been deleted from the potential solutions figure of the ITRS Roadmap.


The roadmap concedes that spin-on-organic ILD has been a total failure. What was the holy grail of chemical companies in the late 1990’s, is at last labeled a dismal failure.


The transition to 300mm fabs resulted in a huge difference in the amount of automation used for processing. There are very high levels of individual tool automation, highly integrated factory CIM systems, large usage of FOUPs and minienvironments, and automated intrabay handling systems


Automation accounts for about 6 percent of the cost of a 450-mm fab, or more than $100 million, double the automation cost burden of a 200-mm production fab.


There are several aspects of copper processing that are challenges. The common barrier layers, Ta/TaN are inert materials and not easy to polish. This has led to a two-step polishing process for removal of the copper first, followed by a second step of removing the barrier layer.


Corrosion of the metal is a problem, as copper shows a high sensitivity to corrosion.


Also, copper can poison other front-end processes, and the copper processing area needs to be isolated from the rest of the fab.


Finally, the complexity of the copper processing leads to challenges in CMP integration. The features on an IC have a variety of densities – highly dense arrays and large bond pads. Each area can polish differently. Also, there are incoming non-uniformities in the copper film, which presents a problem in across-the-wafer CMP uniformity.


The need to minimize total copper loss is critical. Copper loss comes from three areas — field oxide thinning adjacent to a copper interconnect, erosion of copper in arrays with densities up to 90%, and dishing of copper over wide lines of 10 to 100 microns. Minimization of copper loss will keep resistance variations to a minimum. As plating chemistries get more complex and porous low-k materials come on stream, the balance between high throughput and minimal copper loss becomes more critical.


CMP slurry suppliers are working at minimizing thickness variation and copper loss during processing, reducing topography through the entire IC build, and developing process consistency and process stability. Between 1997 and 2000, there was a 500% improvement in planarity by minimizing copper dishing and oxide erosion. Key is a first step slurry with improved planarization performance through engineered particles, proprietary chemicals, and process recipes, and a second step slurry that is highly tuned and highly selective.


A key issue is integration of various components into a single tool for complete deposition and processing of a copper fill. The integrated tool will combine copper fill, copper bevel clean, and copper anneal, all in one clustered tool with a significantly smaller footprint than all individual tools.


For metal barrier and seed, ALD is anticipated to be the means of barrier deposition for future geometries, penetration poses a significant integration challenge. Films created using this approach show excellent resistance to barrier intrusion, even without pore sealing. Because of its high efficiency, UV light or e-beam curing is superior to furnace curing. As the film is cured with UV or e-beam to create the homogeneous nanopores, cross-linking of the silicon oxide matrix also occurs. This improves the film’s hardness and elastic modulus (~1 and 5.8 GPa, respectively, post-treatment).


Strategies vary within the industry, and some companies are pursuing alternatives to low-k materials such as design and packaging effects to reduce capacitance.


Risk and cost management are key factors. Semiconductor manufacturers initially focused their approach on dielectric constant. Now risk and cost are drivers.


Details of the new report, table of contents and ordering information can be found on Electronics.ca Publications’ web site.  View the report: 450mm/Copper/Low-K Convergence: Timing, Trends, Issues, Market Analysis.


 


 



300mm - 450mm Wafer Issues and Market Trends